Well I'm going to a Custom Long Arm setup, so I am selling the parts I will not be needing. All of these parts were run with 7.5 inches of lift and no problems.

Control Arm Drop Brackets... 50.00 plus shipping.
(these have a brace welded to the side of them, I welded a plate to the unibody then welded the brace to that.) Can post pics if interested.

Rubicon Express fixed lowers with newer bushings... 30.00 + shipping.
(Can include factory uppers with new bushing for free if interested.)

Like these only painted black....



DISCO'S SOLD, THANKS JIMMY.

Sway bar with quick disco's attached and new bushings... 25.00 + shipping. Also have bottom pins and clips.

 

Would you take the disco's off and just sell those?

Don't need the swaybar. $25 would still be fine.

 

You have peaked my interest in the CA drop brackets. please post or pm me some pics and I CALL DIBS.

 

second dibs on the drop brackets.

 

Here is a couple pics of them. The brace will stay welded to the side of the bracket, I have a piece of 1/4" plate welded to the bottom side of the unibody then welded the brace to that to help spread the load of the brace. Has worked flawlessly. Basically you'll need a couple small pieces of plate and 15 minutes with a welder and you'll be good to go. I will include all hardware also.

Sorry for the crappy pics, it was dark when I left for work this morning. Kind of hard to balance a flashlight and take a decent picture.

 

I also have access to another set of drop brackets, but he wants 100.00 for them and they have no braces with them if anyone is interested.

 

I checked my funding and it is a little to tight right now, so I will pass dibs on to JakeWI.

 

What is the center to center length on the LCA's?

Nick

 

16" eye to eye.

 

And thank you SIR!

 

Is 16" about stock length, I only have a 3 inch lift but want a better LCA, will they fit right in?
nvm found it, 15 3/4 stock, 16.09 at 3 inch lift.

 

Hey very interested in the control arms, whats the best deal you can do shipped to 13116?

 

35.00 shipped? You do know that the drop brackets have the insert in them that pushes your lowers forward. Or you can run them without the inserts in the factory location.

 

One more thing, if you do not have access to a welder or dont want to weld to your uni body you can purchase the actual braces from Rubicon for only 89 bucks.

http://www.rubiconexpress.com/Jeep/X...CA&part=RE9905

 

Sale pending on LCA's and brackets.....