RE Long Arm kit-$800
-comes with orignal bolts and instructions
-kit was not welded to unibody
-almost brand new, just been sitting in the garage
RE 5.5" coils-$110
97 engine/trans/t-case-$800
comes with wiring harness,fan,fan shroud, computer
has trans cooler and engine cooler
live wires distrubter
flow master water pump and thermostat
mean green starter and alternator
HD radiator hoses
little over 75,000 on trans and engine
t-case has slip yoke eliminator less 50 miles on it
oil change every 2,000 miles with royal purple

only problem it hasnt been run in a while, but never had trouble with it

Rustys Parts
rustys track bar brace $40
rustys steering box brace $40
rustys OTK w/ HD track bar and mount $300
Rusty's fixed LCA's- w/ 4 new bushings and 2 new bushings for D30 UCA mounts $70 for the whole package

Red Neck RAM
modified steering pump and gear box w/ redneck ram hydro assit $300
-comes with mounting tabs and hoses

Axle
D30- super 30 w/ air locker and axle seals and new hubs, 1/4" LCA mounts, Modified TB mount, knuckles redrilled to 3/8" for OTK setup
-4.10 gear ratio, less than 50 miles on it, abs disconnected
make me an offer on D30

Stock Parts
Rear Doors- $50
Rear Hatch- does not have rear wiper motor or inside interior $50
Hood $55
3 front window motors a piece $30
Both airbags diver/passenger $100 for both
2 rear windows and 1 sunroof window $10 a piece

Roll Cage-$500

 

front and rear tom woods driveshafts zerk fittings-a piece $250
JET chip stage 1 never used still in package $180

 

PM'd

 

Location?

 

gurnee,il

also have rear tailights $30 for both

2-dash clusters

 

Any pics on the clusters?

 

sent you a PM

 

how would I get the roll cage into my jeep? does it come apart?

 

Defiantly
Want the RE coils if they are still availible

 

I'll take the Rusty'# LCAs and UCA bushings for $70.00 if you still have them. Ship to zip is 49111. Please pm me your paypal address and total.

 

how much for the SYE transfercase, dana 30 w/4.10... and what kind of transfercase? im 5-10 min from you

 

What size lift were the Tom woods drive shafts for? also any chance that you might be willing to ship to Tacoma, WA. I'm interested in the RE Long Arm, 5.5" Coils, Front and Rear Drive Shafts, and well the roll cage but I am not sure if thats worth the shipping it would cost.

Ryan 98466

253-344-8694

 

sorry i havent responded to everyones pm's trying to set up my bank account on paypal, ill respond in the order of the messages as to be fair with who came first

 

I know someone already asked about them, but do you know the length (eye to eye) and how much lift the Rusty's LCA's are good for?

 

those stock front shafts? if so how much for one shipped to 23836