JeepCoMJ

1989 jeep Ax15 manual transmission. has 97xxx miles on it with no issues shifting whatsoever. the fluid that was in it came out perfectly clean, with no metal flakes. It was in a 1989 jeep comanche. This means that it has the .50" pilot bushing diameter, so would be a complete bolt in to replace your ba10/5 in your cherokee, comanche, or yj wrangler. It will also work in your 91 and up H.O. 4.0 jeeps, needing only a different bushing (I have the part number for it somewhere).
It is the internal slave setup, but can easily be swapped out to external slave setup...the bellhousings have been going very cheap on ebay lately.

$250 OBO (I am not stuck on my price...make me a reasonable offer)
I also have the complete 5 speed wiring, engine computer, pedal assembly, flywheel, inspection cover, mounts, 4x4 linkages, etc. to go with it for another $100. parts from 1989 renix era 4.0, so the compatibility would be 1987 to 1990 jeep cherokee or comanche 4.0's.

Also up for sale is

1997-2001 Aw4 automatic transmission.
it is 4x4, with 105xxx miles, complete with the mount and torque converter.
$150 OBO

neither trans is including a transfercase, and I do not have a transfercase either.

call me with any other jeep comanche or cherokee parts you may need. I do have quite a bit of parts laying around.

call or text me @ two6two 7one6 five17six

midnightjeeper

I would be interested in the AX15 if you had a way to ship it for a reasonable price!!! TO 33308

JeepCoMJ

It would be around 170 to ship in two boxes with the bellhousing removed

JeepCoMJ

Via ups ground. Around 3 days to get there

JeepCoMJ

ax15 no longer available. jeepers are arguing with my pricing...they go for more than I am asking, so it is now on ebay.

freegdr

its the internal slave one you no Midnight...

JeepCoMJ

The point is moot. All that is available now is the conversion parts, mount, etc.

Sawtoothbiker

Is the Conversion stuff still available?

JeepCoMJ

Yes. Will work on renix years 87 to 90. The slave is bad so you will need one