Disc Brake conversion kit - Dana 35/Chry 8.25
Thread Starter
Senior Member
Joined: Jun 2010
Posts: 890
Likes: 1
From: ............
Year: 2000
Model: Cherokee
Engine: 4.0
I have put together a rear disc brake conversion kit for either the dana 35, chrysler 8.25, or ???
It includes the following parts:
2 - used backing plates (excellent condition - new e-brake pads and hardware installed)
2 - used brake rotors (never used, just a little surface rust - no wear/grooves - excellent condition)
2 - used brake calipers (has new pads - new bushings, boots, and bolts)
2 - used flexible brake lines (installed on calipers)
1 - used GC left hand e-brake cable (excellent condition)
1 - new right hand e-brake cable
2 - new axle shaft seals (either for the 35 or 8.25)
8 - grade 8 bolts and locknuts (for mounting backing plates)
All the used parts came from a 1997 Grand Cherokee Dana 35 axle that had 60k original miles. All the new parts are from NAPA (except the rotors and brake pads, they were already on the Dana 35 when I bought it). The backing plates have no wear on the caliper mounts and are in great shape. I removed and cleaned the caliper bleeders (so you won't have to worry about rounding it off or breaking them when you go to bleed the brakes!) Also the calipers have all new hardware. The rotors have been lightly sanded and cleaned (had surface rust). This is a complete kit to install this on either axle mentioned above. I'm including the set of axle seals so you can change them while you're in there. Even the center hole is bored out bigger for the 8.25. You shouldn't need anything else!
$275 obo + shipping. Parts will be shipped from 97756 via standard shipping. PM me for a shipping quote please.
It includes the following parts:
2 - used backing plates (excellent condition - new e-brake pads and hardware installed)
2 - used brake rotors (never used, just a little surface rust - no wear/grooves - excellent condition)
2 - used brake calipers (has new pads - new bushings, boots, and bolts)
2 - used flexible brake lines (installed on calipers)
1 - used GC left hand e-brake cable (excellent condition)
1 - new right hand e-brake cable
2 - new axle shaft seals (either for the 35 or 8.25)
8 - grade 8 bolts and locknuts (for mounting backing plates)
All the used parts came from a 1997 Grand Cherokee Dana 35 axle that had 60k original miles. All the new parts are from NAPA (except the rotors and brake pads, they were already on the Dana 35 when I bought it). The backing plates have no wear on the caliper mounts and are in great shape. I removed and cleaned the caliper bleeders (so you won't have to worry about rounding it off or breaking them when you go to bleed the brakes!) Also the calipers have all new hardware. The rotors have been lightly sanded and cleaned (had surface rust). This is a complete kit to install this on either axle mentioned above. I'm including the set of axle seals so you can change them while you're in there. Even the center hole is bored out bigger for the 8.25. You shouldn't need anything else!
$275 obo + shipping. Parts will be shipped from 97756 via standard shipping. PM me for a shipping quote please.
Last edited by JCKustoms; Mar 7, 2012 at 10:44 PM.
If you can confirm if the kit will work with XJ Dana 44 & shipping is not going to kill me. I am interested in buying.
Zip code is: 16229
Email me: mjpst43@yahoo.com
Matt
Zip code is: 16229
Email me: mjpst43@yahoo.com
Matt
Thread Starter
Senior Member
Joined: Jun 2010
Posts: 890
Likes: 1
From: ............
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by shocker6
If you can confirm if the kit will work with XJ Dana 44 & shipping is not going to kill me. I am interested in buying.
Zip code is: 16229
Email me: mjpst43@yahoo.com
Matt
Zip code is: 16229
Email me: mjpst43@yahoo.com
Matt
Trending Topics
Thread Starter
Senior Member
Joined: Jun 2010
Posts: 890
Likes: 1
From: ............
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by fritzthekatt
Jck, if you plan or putting more of these together Im interested in one
Junior Member
Joined: Apr 2011
Posts: 42
Likes: 0
From: Southern California
Year: 2000
Model: Cherokee
Engine: 4.0L
I want to make you an offer. I live in Southern California, Dana Point 92629...my email is zeke180@yahoo.com
MY 2000 CHEROKEE HAS A 8.25 REAR
MY 2000 CHEROKEE HAS A 8.25 REAR
Thread
Thread Starter
Forum
Replies
Last Post
aa7kn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 23, 2015 09:08 AM
RickJames Bish
Modified XJ Cherokee Tech
5
Sep 2, 2015 03:22 PM
Montana5991
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Sep 2, 2015 09:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



