Depending on what kind of 10" you want. I have one Kicker comp 10" for sale still that's still like new. It's the one in my box shown on the first page. I could make you a box like with this sub loaded in it for 200.00 shipped.

 

Still thinkin about it do you need to cut out the cubby or does this mount on top of the whole panel. And how about some pics of one not installed so we can get an idea on how it is constructed

 

Yes the cubby panel has to be cut out. If I dont do this then you would get no air space to run anything like a 10". Plus it looks way better this way,Sounds better, and it's not going anywhere either.

I think I have some pics of it before the face went on it. I will half to look.

 

might be interested in one, have a 15 with a huge box in the back of mine, would be nice to have some room in the back. would you see any problems running a high power 12 (1000+ watts)with this box

 

As long as the airspace is not too far out there it would be fine. The bigger badder sub you use will push the box farther out in the way. I try to keep the box and sub flush with the hatch opening. Let me know what you wanna do.

 

UPDATE!!!!!!


Okay, I have decided im only going to make this first run of boxes before X-mas. I am doing 10 at the max until after X-mas maybe if then not sure yet. If you want a box done I will say the deadline to receive payment on the first 10 boxes are Dec. 15th! This way I can build them and hopefully get them shipped back out B4 X-mas. If there is still interest after those and after the holidays then I will build some more. Order up guys!

 

Forum is fast tonight. To the top again. Sure was alot of interest but I would like to get this ball rolling. I have one box to build but its from the Jeep Forum. Another guy on here is getting one of my subs. Let's get the boxes going so I can go get my Bro In Law's Jeep to mach up and make these things for you guys. Let's getter done!!

 

maybe you should post a price in here so people know what the deal is. Also how much of the panel do you need to cut?

 

Standard boxes like mine will start at 135.00 shipped pending location. Some will be more.


The panel will be cut right around the groove of the cubby!

 

so it will be open to the inner fender dont think that would any good for the sound. Cant you get enough air flowing inside the box between the cubby and the space in the box

 

also pics of the cubby cut out

 

Its not a open box, It is completely sealed off. Here is a pic with the front face off. It is a REAL sealed box. I would not attempt to have the back open to get air in the panel. This is the real deal.

 

I dont have a pic of how I done the plastic cubby itself. You pretty much follow the line and cut it out.

 

I will have detailed instuctions with pics and prolly some videos to help you guys with putting it in. It's pie if I show ya how.

 

you have a pm