For sale ***This area has been closed. You can view posts but can not create new posts or reply to existing posts in here.***

97 XJ---some miscellaneous parts

 
Thread Tools
 
Search this Thread
 
Old Sep 16, 2010 | 09:42 AM
  #1  
Metlic53's Avatar
Thread Starter
CF Veteran
 
Joined: Nov 2009
Posts: 1,262
Likes: 0
From: Conroe, Texas
Year: 1997
Model: Cherokee
Engine: I6
Default 97 XJ---some miscellaneous parts

up for sale are the following---Located in Conroe, Texas

Stock Roof Rails from a 97 XJ--in mint condition, never had anything strapped onto them.

Exhaust Manifold - No cracks, worked fine when i took it off

Stock Sway bar links with Polyurethane bushings

Rear Rocker Guards-made to fit with bushwhacker fender flares-note, i ordered these from custom 4x4 and he made them too short so they were about an inch away from the flares and you could see the body because it was not flush so i am selling these. It did not look bad, it just wasn't flush with the body-I paid 100 bucks shipped for both of these guards.

Just shoot me a offer if you're interested

Sorry for the small pictures, i could not figure out how to make them a bigger size. Thanks for looking!
[IMG]file:///F:/Graphics/0916100821-02.jpg[/IMG]


















[IMG]file:///F:/Graphics/0916100821-01.jpg[/IMG][IMG]file:///F:/Graphics/0916100821-01.jpg[/IMG]
Old Sep 16, 2010 | 11:17 AM
  #2  
bryank's Avatar
Junior Member
 
Joined: Sep 2010
Posts: 37
Likes: 0
From: MI
Year: 1999
Model: Cherokee
Engine: 4.0
Default

How much for the sway bar links?
Old Sep 16, 2010 | 08:15 PM
  #3  
Metlic53's Avatar
Thread Starter
CF Veteran
 
Joined: Nov 2009
Posts: 1,262
Likes: 0
From: Conroe, Texas
Year: 1997
Model: Cherokee
Engine: I6
Default

Originally Posted by bryank
How much for the sway bar links?
PM sent
Old Sep 17, 2010 | 06:46 PM
  #4  
Metlic53's Avatar
Thread Starter
CF Veteran
 
Joined: Nov 2009
Posts: 1,262
Likes: 0
From: Conroe, Texas
Year: 1997
Model: Cherokee
Engine: I6
Default

sway bar links sold.

Exhaust manifold still for sale

Roof rails still for sale

Rocker Guards still for sale
Old Sep 17, 2010 | 10:39 PM
  #5  
The Black's Avatar
Senior Member
 
Joined: Apr 2009
Posts: 954
Likes: 2
From: New Waverly, Tx
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
Default

Whats Up Metlic53. Do you have a pic. of the rear rocker gaurds when they were on your jeep. Somewhat interested in them.
Old Sep 18, 2010 | 08:23 AM
  #6  
Metlic53's Avatar
Thread Starter
CF Veteran
 
Joined: Nov 2009
Posts: 1,262
Likes: 0
From: Conroe, Texas
Year: 1997
Model: Cherokee
Engine: I6
Default

Originally Posted by The Black
Whats Up Metlic53. Do you have a pic. of the rear rocker gaurds when they were on your jeep. Somewhat interested in them.
as soon as i get off work i will post some pics of it. Im not sure if i have those exact ones with pics but i will def post the ones that are on the jeep now. they are just a little bit shorter because the guy measured them off an inch so he just fabbed some more and sent me the correct size. they looked fine and i didnt care but he wanted to take care of me so i didnt complain.
Will post pics as soon as i'm off work.
Thanks for the inquire.
John
Old Sep 18, 2010 | 08:31 AM
  #7  
Metlic53's Avatar
Thread Starter
CF Veteran
 
Joined: Nov 2009
Posts: 1,262
Likes: 0
From: Conroe, Texas
Year: 1997
Model: Cherokee
Engine: I6
Default

You can see them in this picture, i will post some more up later.
I paid $80 bucks for them but now i have two sets, i'd rather sell them to a fellow jeeper.
Old Sep 18, 2010 | 08:36 AM
  #8  
The Black's Avatar
Senior Member
 
Joined: Apr 2009
Posts: 954
Likes: 2
From: New Waverly, Tx
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
Default

I dont see any pic.
Old Sep 18, 2010 | 10:23 AM
  #9  
Metlic53's Avatar
Thread Starter
CF Veteran
 
Joined: Nov 2009
Posts: 1,262
Likes: 0
From: Conroe, Texas
Year: 1997
Model: Cherokee
Engine: I6
Default

Old Sep 18, 2010 | 10:43 PM
  #10  
The Black's Avatar
Senior Member
 
Joined: Apr 2009
Posts: 954
Likes: 2
From: New Waverly, Tx
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
Default

Ok. Not what I was expecting. Thought they were a little bigger than that. Thanks though.
Old Sep 19, 2010 | 09:52 AM
  #11  
Metlic53's Avatar
Thread Starter
CF Veteran
 
Joined: Nov 2009
Posts: 1,262
Likes: 0
From: Conroe, Texas
Year: 1997
Model: Cherokee
Engine: I6
Default

Originally Posted by The Black
Ok. Not what I was expecting. Thought they were a little bigger than that. Thanks though.
no problem, i had them made to cover the body where the plastic bumper end caps used to go because i got bushwhacker flares.
Old Sep 21, 2010 | 12:05 AM
  #12  
bryank's Avatar
Junior Member
 
Joined: Sep 2010
Posts: 37
Likes: 0
From: MI
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Thanks! Super Fast Shipping!!!!!!!!!
Old Sep 21, 2010 | 10:57 AM
  #13  
Metlic53's Avatar
Thread Starter
CF Veteran
 
Joined: Nov 2009
Posts: 1,262
Likes: 0
From: Conroe, Texas
Year: 1997
Model: Cherokee
Engine: I6
Default

Originally Posted by bryank
Thanks! Super Fast Shipping!!!!!!!!!
no problem! Was it what you wanted?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
erupert66
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 15, 2015 02:07 PM
PhilA
Introductions
3
Sep 10, 2015 12:37 PM
Hewittxj
Modified XJ Cherokee Tech
4
Sep 8, 2015 06:21 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:14 PM.