Jeep is located in Woodbridge VA. If you're not local and are not willing to come pick it up either with a trailer or by buying mine... I can't entertain any offers. Sorry.


As for the rig, here's the specs. I have over $12,000 into this Jeep in parts that I bought all brand new with the exception of the axles. Take it for what it's worth. It's been wheeled and it's been a ton of fun. But with a boat and Jeep... I can only have one money pit after the divorce.

The Good
- 4.0 L motor with 198,000 miles (runs strong, no smoke) oil changed every 3000-4000 miles
- (1) Rusty's 8" Hi-Clearance Long Arm Lift Kit
- Rusty's Builder Fab Coil Buckets
- Rusty's Builder Fab Lower Control Arm Mounts
- Rusty's Builder Fab Universal Shock Mounts
- (2) Dana 44 LP axles out of 89 Waggy (front and rear)
- TSM Disc Brake Conversion Kit for Dana 44 for rear axle
- New front rotors, pads and calipers
- New Drivers Side Stub Shaft
- New Wheel Bearings for inner and outer on the front
- Warn Locking Hubs
- Extended braided steel brake lines in all four corners
- (5) 36x13.50 R15 Irok tires on 15x10 6 lug Crager Soft 8 steel wheels (70% tread left)
- (1) NP231J 23 spline transfer case with 4:1 kit
- TeraLow 4:1 Kit
- TeraLow 2LO kit
- AW4 Auto transmission
- Aluminum Novak Shifter (matches Ox Locker shifters)
- (2) Ox Lockers for Dana 44 for front and rear with aluminum shifters
- (2) 100 inch Ox Locker Cables
- (2) Yukon 4.88 gears
- (2) Yukon master install kits for gears
- (4) Bilstein 5150 12" travel remote resevoir shocks
- New Water pump from Advanced Auto Parts
- New Power Steering Gear Box
- Rockhard 4x4 rear bumper with tire carrier
- AJ's Offroad Armor super rock rails
- Custom built stinger winch front bumper
- Skid Row gas tank skid with mods by me
- Custom 1.25 DOM .360 wall, Steering by 505 Performance with 5/8th rod-ends and heim joints
- Husky Liner Molded Floor Mats, Front, Rear and Cargo Area
- New Front U-Joints
- New Drive Shaft U-joints for rear shaft
- Custom Yoke/Pinion E-Brake Kit
- SuperWinch 9.0 EPI Winch
- Alpine AM/FM/CD/MP3 with Ipod cable and controls
- MTX 75x4 Amp for Mids and tweeters
- MTX 200x1 for sub
- MTX 12" Sub in ported box
- MB Quart 5 1/4 component set with titanium dome tweeters in front
- MB Quart 5 1/4 co-ax in rear sound bar
- Uniden CB with 3 ft antenna
- Spare Front Drivers Door, Both Rear passenger Door Spares

The Bad
- Needs a power steering pump (the return inlet broke off while trying to replace the hose)
I may replace the pump if someone is serious about buying the rig
- Dents in all panels from wheeling
- Grill has dent above passenger side headlight
- The fact that I have to sell it sucks

The Price
$6900 with trailer or $6000 without OBO
PM me for more info.

The Pics
How she looks currently as of today


Rear Disc Brake Kit

Front Axle, Locker and Truss

OX Locker Shifter Setup

Custom E-brake on Transfer case Yoke

Trailer ($1000 by itself or $900 with the sale of the rig)

 

good lookin jeep man.
got alotta cash in this rig. keep up the good work.
Paul

 

good looking jeep man! 2 bad 4 the divorce

 

nice Heep