87 choped built xj pics inside
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 543
Likes: 0
Year: 1987
Model: Cherokee
Engine: 4.0 soon to be gc ho 4.0
heres details, asking 1800.00 cash
cant buy all these parts for that.
4.5 lift, new
dana 44 rear
ballistic fab rear dana 44 3/8 cover, with full truss welded
solidaxle.com front diff cover,
gas tank skid,
t case skid,
31x10.50r15 super swampers with 1/4 tread, and set of 33x10.50 superswamper thornbirds
surco roof rack, new
custom front bumper with brand new smittybuilt winch 8k,
HD tie rod, 1.25 solid steel with new tie rod ends
and aHD adjustable trac bar 1.25 solid steel both from ironrock offroad.com
choped rear hatch, the jeep has one mechanical problem, i have the part to fix, Sometimes it wont shift out of first gear, jeep said it was shift selenoid e. i have the part and a spare trans to go with thats been rebuilt.
jeep has all new relays, new sensors, new cat, new muffler, new brakes, new gaskets on valve cover, new starter, all new ignition including switch, new fan clutch and new altenator. i did as much prevenative maintenece as possible to keep from down time in woods. this jeep does great off road and i was going to build an exo cage for it but i need a daily driver now. it crawls great with the lower gear installed in t case, does really well offroad and Flexes above average, suspension is dialed in with longtravel rc shocks, looks like a trail rig not a show truck but does awesome...no leaks anywhere except for power steering line it leaks but not enough to make it to driveway. i bought the jeep then put all these parts on it, i spent more than a couple grand and lots of hours on it in the past 3 months, here are links to pictures if they dont work i can email some as well... its auto and has the 4.0 inline six.








cant buy all these parts for that. 4.5 lift, new
dana 44 rear
ballistic fab rear dana 44 3/8 cover, with full truss welded
solidaxle.com front diff cover,
gas tank skid,
t case skid,
31x10.50r15 super swampers with 1/4 tread, and set of 33x10.50 superswamper thornbirds
surco roof rack, new
custom front bumper with brand new smittybuilt winch 8k,
HD tie rod, 1.25 solid steel with new tie rod ends
and aHD adjustable trac bar 1.25 solid steel both from ironrock offroad.com
choped rear hatch, the jeep has one mechanical problem, i have the part to fix, Sometimes it wont shift out of first gear, jeep said it was shift selenoid e. i have the part and a spare trans to go with thats been rebuilt.
jeep has all new relays, new sensors, new cat, new muffler, new brakes, new gaskets on valve cover, new starter, all new ignition including switch, new fan clutch and new altenator. i did as much prevenative maintenece as possible to keep from down time in woods. this jeep does great off road and i was going to build an exo cage for it but i need a daily driver now. it crawls great with the lower gear installed in t case, does really well offroad and Flexes above average, suspension is dialed in with longtravel rc shocks, looks like a trail rig not a show truck but does awesome...no leaks anywhere except for power steering line it leaks but not enough to make it to driveway. i bought the jeep then put all these parts on it, i spent more than a couple grand and lots of hours on it in the past 3 months, here are links to pictures if they dont work i can email some as well... its auto and has the 4.0 inline six.








Thread Starter
Senior Member
Joined: Dec 2008
Posts: 543
Likes: 0
Year: 1987
Model: Cherokee
Engine: 4.0 soon to be gc ho 4.0
Kings mountain nc 20 mins from charlotte nc. zip is 28086 someone come get it.
also comes with a hp dana 30 with hd shafts needs u joint to be swaped in.
also comes with a hp dana 30 with hd shafts needs u joint to be swaped in.
Trending Topics
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 543
Likes: 0
Year: 1987
Model: Cherokee
Engine: 4.0 soon to be gc ho 4.0
ok i never said im sellin parts. its all or nothing, you cant buy all the parts i put on it for 1800, i can show reciepts and totals if ya like. but if you want the lift ill take 1000 and 800 for the bumper.
or to be realistic ill take 500 for the lift, 300 for the bumper, 300 for winch, 225 for tie rod, and trac bar, 100 for rear truss, 75 for the rear diff cover, 80 for front cover, 400 for the roof rack, 200 for the optima, 200 for the 33s, 100 for the 31s, 100 for spare d30 hp, 80 fr the t case skid, hmmm so far ive totalled 2660...and thats not including tax and shipping on what i paid and not all the aftermarket parts i have on it just some., oh and ill take 1200 for the jeep, guys i hav alot of new parts, i can list all of them if needed and the jeep is solid, no rust anywhere and no major problems, if you are interested i will sell it otherwise please no ? on selling major parts, now for some i will sell, heres the list and price(not being smart ***)
new surco roof rack with mounts- 100
new smittybuilt winch 8k- 200
thats all i will sell seperate. i have been offered 2500 before it was for sale. it will not be for sale long, i will keep it(i want to) but i need to free up some cash. so if it doesnt sell for 1800 im not selling it. if anyone wants a great trail rig with lots of new hd parts this is it, its not a10000 dollar rig but its gettin there its a good head start for a low price, like i said you cant buy all the new stuff on it for 1800, especially when you include the new tune up stuff, and prevenative maintenence stuff like, fuel pump, filter, alt, batt, selenoids, relays, sensors, vacume lines, valve cover, gaskets, cranksensor, distributor, cap, rotor, wires , plugs, ignition, and lots of hard work.

this is a good deal, im not ****tin anyone and im not sellin a junk rig i just need the money more than i need a toy right now and unemployment is bad two months andno check yet, so like i said if you want a good rig to build this one doesnt need much, by the way it has all the stuff for on board air sittin in back seat and a train horn....and i have tubing to go with it 300 worth to do exo or internal cage.
or to be realistic ill take 500 for the lift, 300 for the bumper, 300 for winch, 225 for tie rod, and trac bar, 100 for rear truss, 75 for the rear diff cover, 80 for front cover, 400 for the roof rack, 200 for the optima, 200 for the 33s, 100 for the 31s, 100 for spare d30 hp, 80 fr the t case skid, hmmm so far ive totalled 2660...and thats not including tax and shipping on what i paid and not all the aftermarket parts i have on it just some., oh and ill take 1200 for the jeep, guys i hav alot of new parts, i can list all of them if needed and the jeep is solid, no rust anywhere and no major problems, if you are interested i will sell it otherwise please no ? on selling major parts, now for some i will sell, heres the list and price(not being smart ***)new surco roof rack with mounts- 100
new smittybuilt winch 8k- 200
thats all i will sell seperate. i have been offered 2500 before it was for sale. it will not be for sale long, i will keep it(i want to) but i need to free up some cash. so if it doesnt sell for 1800 im not selling it. if anyone wants a great trail rig with lots of new hd parts this is it, its not a10000 dollar rig but its gettin there its a good head start for a low price, like i said you cant buy all the new stuff on it for 1800, especially when you include the new tune up stuff, and prevenative maintenence stuff like, fuel pump, filter, alt, batt, selenoids, relays, sensors, vacume lines, valve cover, gaskets, cranksensor, distributor, cap, rotor, wires , plugs, ignition, and lots of hard work.

this is a good deal, im not ****tin anyone and im not sellin a junk rig i just need the money more than i need a toy right now and unemployment is bad two months andno check yet, so like i said if you want a good rig to build this one doesnt need much, by the way it has all the stuff for on board air sittin in back seat and a train horn....and i have tubing to go with it 300 worth to do exo or internal cage.
Last edited by crashzx6r; Apr 24, 2009 at 10:27 PM.
Seasoned Member
Joined: Mar 2009
Posts: 355
Likes: 1
From: In a constant state of confusion
Year: 1989
Model: Wagoneer
Engine: 4.o
This guys isnt parting it out. He said all or nothing. Why would he want to take the time to take parts off that he has put on? Nice rig, it should go fast.
Senior Member
Joined: Apr 2009
Posts: 845
Likes: 0
From: central IL
Year: 01
Model: Cherokee
Engine: 4.0
Nice Jeep man also try this site racingjunk.com it is free to post on there i've had alot of luck sellin stuff on there also traded a few things hope you find a buyer if you were close i wouldn't mind havin it for parts for my jeep hope this helps you
new surco roof rack with mounts- 100
new smittybuilt winch 8k- 200
thats all i will sell seperate. .[/quote]
I guess my eyes dont work then, or you understanding of the english langauage is different then mine.
new smittybuilt winch 8k- 200
thats all i will sell seperate. .[/quote]
I guess my eyes dont work then, or you understanding of the english langauage is different then mine.


