Virginia Fabrication "Stubby" XJ / MJ Winch Bumper with Free Shipping!!!
#1
Former Sponsor
Thread Starter
Join Date: Mar 2013
Location: Short Pump Va.
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Virginia Fabrication "Stubby" XJ / MJ Winch Bumper with Free Shipping!!!
Hello Everyone, we're Virginia Fabrication. A small welding and fabrication shop located in Short Pump Va.
We're proud to offer a $275 "Stubby" winch bumper for the XJ / MJ market.
It's hand built from 3/16″ steel plate.
It bolts onto the Jeep "frame" using 10 Bolts.
Will accept up to a 12k Winch, The bolt pattern is 10" x 4.5"
(Winch / Fairlead not included)
(Please note if your winch's control box mounts on the top of the winch like the one pictured and the wires exit out the back some very minor trimming to the grill / support may be necessary **see picture** this is done to keep the winch back as far as possible to improve approach angle)
Winch Tray has 4 drain holes to keep water away from your winch.
Comes with two 3/4" Welded on D Rings on the front for towing / recovery. Where they mount to the bumper has been boxed and braced for add' strength.
Comes painted with black rattle can truck bed liner for a durable finish.
All hardware to bolt the bumper to the Jeep is Included.
$275 WITH FREE SHIPPING (lower 48 only)!!!
(not in the lower 48, PM me for a quote)
SEVERAL IN STOCK AND READY TO SHIP!!!
To purchase please click this link It will take you to our website.
We also offer "wings" for our stubby bumpers. These bolt on to the Stubby Bumper using pre existing holes to turn your stubby bumper into a complete bumper.
Wings are $100 for the pair with Free Shipping (lower 48 only)
(not in the lower 48, PM me for a quote)
SEVERAL IN STOCK AND READY TO SHIP!!!
To purchase the "wings" please click here It will take you too our website.
Thanks for looking, please keep checking back as we will be offering more bumper designs in the coming weeks
We're proud to offer a $275 "Stubby" winch bumper for the XJ / MJ market.
It's hand built from 3/16″ steel plate.
It bolts onto the Jeep "frame" using 10 Bolts.
Will accept up to a 12k Winch, The bolt pattern is 10" x 4.5"
(Winch / Fairlead not included)
(Please note if your winch's control box mounts on the top of the winch like the one pictured and the wires exit out the back some very minor trimming to the grill / support may be necessary **see picture** this is done to keep the winch back as far as possible to improve approach angle)
Winch Tray has 4 drain holes to keep water away from your winch.
Comes with two 3/4" Welded on D Rings on the front for towing / recovery. Where they mount to the bumper has been boxed and braced for add' strength.
Comes painted with black rattle can truck bed liner for a durable finish.
All hardware to bolt the bumper to the Jeep is Included.
$275 WITH FREE SHIPPING (lower 48 only)!!!
(not in the lower 48, PM me for a quote)
SEVERAL IN STOCK AND READY TO SHIP!!!
To purchase please click this link It will take you to our website.
We also offer "wings" for our stubby bumpers. These bolt on to the Stubby Bumper using pre existing holes to turn your stubby bumper into a complete bumper.
Wings are $100 for the pair with Free Shipping (lower 48 only)
(not in the lower 48, PM me for a quote)
SEVERAL IN STOCK AND READY TO SHIP!!!
To purchase the "wings" please click here It will take you too our website.
Thanks for looking, please keep checking back as we will be offering more bumper designs in the coming weeks
Last edited by VIRGINIA FABRICATION; 03-25-2013 at 10:15 PM.
#3
Former Sponsor
Thread Starter
Join Date: Mar 2013
Location: Short Pump Va.
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Thanks for the interest, i'm glad you like it
Here's a pic of the unibody tie in, It's the same on both sides.
Here's a pic of the unibody tie in, It's the same on both sides.
Last edited by VIRGINIA FABRICATION; 03-13-2013 at 04:36 PM.
#5
CF Veteran
Join Date: Jan 2011
Location: Virginia
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Hey man, glad to see your expanding out onto other furoms. Hope you get some good business from over here. Keep up the great work. Hope to see some more of your products on here.
#7
Former Sponsor
Thread Starter
Join Date: Mar 2013
Location: Short Pump Va.
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Working on a new batch today, along with a new bumper that will be listed on here in the next few days
Trending Topics
#12
Former Sponsor
Thread Starter
Join Date: Mar 2013
Location: Short Pump Va.
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
My appologies for the confusion, yes they are tack welded in the first pic as that was an in progress build picture.
They are FULLY WELDED.
Infact, I just recently pulled out a stuck forklift with the same bumper that is in those pics, while moving a trailer around the yard.
Again, sorry for the confusion.
They are FULLY WELDED.
Infact, I just recently pulled out a stuck forklift with the same bumper that is in those pics, while moving a trailer around the yard.
Again, sorry for the confusion.
Last edited by VIRGINIA FABRICATION; 03-20-2013 at 05:12 PM.
#15
Former Sponsor
Thread Starter
Join Date: Mar 2013
Location: Short Pump Va.
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
I have not been informed of any issues with any of the bumpers I have made, I build them with the utmost quality in mind.
However, if anyone has any issues with their bumper please contact me and I will do my best to make it right.
However, if anyone has any issues with their bumper please contact me and I will do my best to make it right.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)