vinyl decals. anything and everything
Member
Joined: Feb 2012
Posts: 122
Likes: 0
From: Monticello, In
Year: 1997
Model: Cherokee
Engine: 4.0
found out my problem. the masking tape on the front was stick hard to the vinyl and the plastic sheets, were sticking as well making it extremely difficult to take off the vinyl, thus ripping the vinyl. on one of my e's there was the plastic sheet on the other side of the vinyl , (the back side). With all this, after finally placing my P on by hand, I got it to look really well, all the times i tried it kept pulling up the vinyl because on the plastic pieces being stuck on so hard.
When it came to the company logo, i had no troubles at all, so I know i am doing it right, at least as far as i have read and seen.
When it came to the company logo, i had no troubles at all, so I know i am doing it right, at least as far as i have read and seen.
Thread Starter
Cherokee Forum Vendor
Joined: Jun 2011
Posts: 1,374
Likes: 0
From: N GA Mtns
Year: 1993
Model: Cherokee
Engine: 4.0
Originally Posted by Tylerball72
found out my problem. the masking tape on the front was stick hard to the vinyl and the plastic sheets, were sticking as well making it extremely difficult to take off the vinyl, thus ripping the vinyl. on one of my e's there was the plastic sheet on the other side of the vinyl , (the back side). With all this, after finally placing my P on by hand, I got it to look really well, all the times i tried it kept pulling up the vinyl because on the plastic pieces being stuck on so hard.
When it came to the company logo, i had no troubles at all, so I know i am doing it right, at least as far as i have read and seen.
When it came to the company logo, i had no troubles at all, so I know i am doing it right, at least as far as i have read and seen.
CF Veteran
Joined: Mar 2011
Posts: 1,842
Likes: 0
From: Woodinville, Bothell and Marysville Washington
Year: 2000
Model: Cherokee
Engine: I6 4.0
I just remembered I asked for some decals but told you to hold off. Just forgot until now! Totally forgot what I wanted too...
Junior Member
Joined: Nov 2011
Posts: 54
Likes: 0
From: binghamton ny
Year: 2001
Model: Cherokee
Engine: 4.0L
It looks good from the pictures. I don't think I would be good at big decals because I had a hell of a time just getting the cf decals on straight haha
Thread Starter
Cherokee Forum Vendor
Joined: Jun 2011
Posts: 1,374
Likes: 0
From: N GA Mtns
Year: 1993
Model: Cherokee
Engine: 4.0
Originally Posted by Tylerball72
havent put up my jeep life yet, afraid to, can you give step by step instructions on how to apply?
Thread Starter
Cherokee Forum Vendor
Joined: Jun 2011
Posts: 1,374
Likes: 0
From: N GA Mtns
Year: 1993
Model: Cherokee
Engine: 4.0
Originally Posted by KRABBY124
It looks good from the pictures. I don't think I would be good at big decals because I had a hell of a time just getting the cf decals on straight haha
Member
Joined: Jan 2012
Posts: 119
Likes: 0
From: coleman, TX
Year: 1997
Model: Cherokee
Engine: 4.0L 6cyl.
Senior Member
Joined: Aug 2009
Posts: 723
Likes: 0
From: Ga and Va
Year: 15
Engine: 3.6
How much for this in an 15"x15" package?
The black would need to be red since my windows are tinted. Maybe keep the keep the gold.Maybe not.... Can you send me a draft of both?
The black would need to be red since my windows are tinted. Maybe keep the keep the gold.Maybe not.... Can you send me a draft of both?
Last edited by OnAll4s; Apr 1, 2012 at 12:49 PM.
