I have a Cherry Bomb Extreme on right now with a rigged side exit. The CB is only 12in. long and already has a 2.5in. opening that is slightly expanded to fit that size pipe inside. The muffler is also a center outlet, not offset. Can I get a tailpipe 2 inches longer at the muffler end that will fit like stock, but compensating for the center outlet? Will it be louder than the stock piping? In the mean time I will ask around to see who has a pipe bender and can bend me a short piece of pipe in an S so I can connect it to the tailpipe again. I can't move the tailpipe over and just do a straight piece of pipe unfortunately. The tailpipe hits the shock.

 

Sorry but I do not know if it will hit the extended shackles. We've tried USPS in the past but they are almost always higher. Plus we ship 50-100 packages a day so they just are not set it well for that kind of volume.

The muffler is a Center in / Offset out, just like the OE setup.

Yea I was camping with the family. Do you remember who you spoke with?

Unfortunately we are just a warehouse. I do not bend anything. So what you see is what you get.

 

An older fellow and a younger looking guy in glasses.One of them was driving a white zj.

 

[QUOTE=Unfortunately we are just a warehouse. I do not bend anything. So what you see is what you get.[/QUOTE]

Alright, thanks anyway!

 

these shouldn't have a problem with LII's leaf sliders would it? I can't imagine it would...

 

The converter and magnaflow muffler I ordered fit just fine. Although the tail pipe doesn't seem to be the right one. Neither me or the exhaust shop could get it to fit. Do you have any advice on what I should do with it? I have a 98 Cherokee. Thanks ahead of time

 

On your website looking at purchasing an all stainless system. I like the Magnaflow system and I'd like to get the free High Flow converter, the stainless tube that would run between the two and new O2 sensors.

Can you provide a quote, and also please do not forget to apply the Father's Day Magnaflow discount (20% off). Thanks.

 

Where is the 20% off discount? I don't see that

 

Left side under Discount

 

I am looking to order a kit for my dads XJ and these pipes are 2.5 inches I want to order a Spincat cat as well,

Should i get a 2.25 cat and then reducer or else a 2.5 cat and reducer from the cat to downpipe, also will i need some straight pipe with the shorter cat

 

When shopping for which muffler, this may help.

Sound comparison
http://www.youtube.com/watch?feature...q-fToDlXA&NR=1

Horse power and decimal comparison
http://www.mustang50magazine.com/tec...t/viewall.html

 

Do you ship to Hawaii?

 

The 20% discount only applies to MagnaFlow branded catbacks, not our piece together kit. If your looking at the actual MagnaFlow catback then we can apply it. However you can either get the 20% discount or the free converter, we do not allow you to get both.

If your at 2.5" before the cat then you should just run 2.5" everything.

We do. It's not cheap though.

 

How much longer is that promotion good?

 

Can the tail pipe be shipped for less than $56. Seems a little high. Maybe USPS? Did it maybe configure it wrong? I'd be happy to send you a shipping label of my own to save. lol