need a RC vendor and Ballistic vendor please
#1
MJ>XJ
Thread Starter
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
need a RC vendor and Ballistic vendor please
RC vendor...
i bought a ebay elcheapo lift for my 2010 Z71 (itll never see offroad)... the 3in front spacer that goes over the strut and a shackle for the rear... well ive got horrible vibes... 3in is to much... RC sell a 3in lift for my truck and it comes with a diff drop... only company i have seen with a diff drop... i need a diff drop to get rid of these vibes now... how can i go about it? ready to buy today! tonight! tomorrow! if i can buy just the diff drop which would surprise me can i get some pics and stuff so i cant built my own? i gotta do something... thanks!
ballistic fab vendor...
I need a price and advice on radius arm joints... im going to keep the stock bushings on the axle side of my 05 F250 dana 60... but i gotta build my own arms for clearance issues at the unibody... i need a single joint... one on each side... that is strong enough to carry such a heavy dana 60 on radius arms... there so many different sizes on the website i dont know which ones are overkill for like rockwells and which are for dana 30's... ill need them both in the RH thread WITH the tube adapters to i guess maybe 2in tube 3/8 thick would be strong enough... not sure what that makes the inside diameter... if theres a easier set of number that are strong enough then thatll work... please let me know if any more info is needed... i was looking at the 3in joints but maybe overkill i dunno?
Thanks!
edit: may be doing a 4 link style setup with the upper arms to the lower arms on both sides... this way i can make them adjustable... in this case i would need two smaller joints for the uppers to meet the lowers... also RH thread and tube adapters to the same thickness... thanks
i bought a ebay elcheapo lift for my 2010 Z71 (itll never see offroad)... the 3in front spacer that goes over the strut and a shackle for the rear... well ive got horrible vibes... 3in is to much... RC sell a 3in lift for my truck and it comes with a diff drop... only company i have seen with a diff drop... i need a diff drop to get rid of these vibes now... how can i go about it? ready to buy today! tonight! tomorrow! if i can buy just the diff drop which would surprise me can i get some pics and stuff so i cant built my own? i gotta do something... thanks!
ballistic fab vendor...
I need a price and advice on radius arm joints... im going to keep the stock bushings on the axle side of my 05 F250 dana 60... but i gotta build my own arms for clearance issues at the unibody... i need a single joint... one on each side... that is strong enough to carry such a heavy dana 60 on radius arms... there so many different sizes on the website i dont know which ones are overkill for like rockwells and which are for dana 30's... ill need them both in the RH thread WITH the tube adapters to i guess maybe 2in tube 3/8 thick would be strong enough... not sure what that makes the inside diameter... if theres a easier set of number that are strong enough then thatll work... please let me know if any more info is needed... i was looking at the 3in joints but maybe overkill i dunno?
Thanks!
edit: may be doing a 4 link style setup with the upper arms to the lower arms on both sides... this way i can make them adjustable... in this case i would need two smaller joints for the uppers to meet the lowers... also RH thread and tube adapters to the same thickness... thanks
Last edited by huntingman2706217; 01-31-2011 at 07:23 PM.
#2
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Drop Grimus a buz for RC stuff and he likely can get you exactly what you need.
https://www.cherokeeforum.com/members/grimus99xj-1292/
https://www.cherokeeforum.com/members/grimus99xj-1292/
#4
MJ>XJ
Thread Starter
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
Originally Posted by okcjeeper
Drop Grimus a buz for RC stuff and he likely can get you exactly what you need.
https://www.cherokeeforum.com/members/grimus99xj-1292/
https://www.cherokeeforum.com/members/grimus99xj-1292/
#5
MJ>XJ
Thread Starter
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
Originally Posted by Pistol-McGee
i dont think theres a ballistic vendor here (could be wrong, never seen one) But since i know your on pirate i would just hit them up over there
Thread
Thread Starter
Forum
Replies
Last Post
Jamesmon4
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
08-16-2016 09:04 PM
MUDRUNNER AZ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
09-18-2015 09:18 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)