Go Back  Jeep Cherokee Forum > Buy, Sell, Trade > Vendor Showcase
Beefy Dana 60 Steering options @ Ruffstuff! >

Beefy Dana 60 Steering options @ Ruffstuff!

Vendor Showcase A place for our Vendors to showcase their products and advertise their business.

Beefy Dana 60 Steering options @ Ruffstuff!

Old 03-19-2018, 09:34 AM
  #1  
Sponsor
Thread Starter
 
Dan Fredrickson's Avatar
 
Join Date: Mar 2008
Location: Sacramento (Rubicon) Ca
Posts: 2,087
Default Beefy Dana 60 Steering options @ Ruffstuff!

Big bad-*** steering is sort of our mantra here at Ruffstuff.

We are proud to offer a wide variety of HEAVY DUTY
steering options for KINGPIN 60s!


First, we have stout high-steer arms that use a threaded
pre-load adjuster for those who are going spring-less.




These arms feature GM 1-Ton TRE taper for the tie-rod holes, and a larger reamed hole to
support the high angle drag link ends that allow your axle to travel further
without binding or exceeding the maximum angle of the DLEs.



------------------------------------------------------------

We ALSO have arms that go over a stock spring cap for those folks wanting to keep the pre-load springs.



*Note, these are an earlier design, and come with Standard TRE Reaming in both tie-rod and drag link locations.
This of course is easily reamed out, or drilled for heim joint use.

Both styles of high-steer arms are drilled for after-market 5-stud knuckles,
however they work just fine with factory 4-stud knuckles, the 5th hole is just empty.
-----------------------------------------------------------

Now lets talk about how we can link all the moving pieces together,
We offer the same 3 different styles in both spring and springless:

1- Cross-over - in this kit you would be using factory TRE locations on the knuckles to attach the tie-rod, and it would come with one highsteer arm for the passenger side knuckle to attach the Drag link, as well as a new king pin cap on the driver side knuckle.



-----------------------------------------------------------
2- Cross-over + High-Steer - This comes with high steer arms for both knuckles, and you would connect both the drag link, and the tie-rod to them. Big benefit of moving the tie-rod up, and out of harms way (as long as you have the clearance to oil-pan and frame).



-----------------------------------------------------------
3- High-steer Y-Link - This kit attaches the tie-rod to both high-steer arms, however the drag link connects to a tapered hole on the Tie-rod itself (instead of all the way to the knuckle). This is often a benefit for narrower vehicles with link suspension, that have a shorter pan-hard bar, the shorter drag link helps with steering geometry and bump-steer.



-----------------------------------------------------------

You can find all of these kits, as well as individuals or packs of D60 accessories right here:


Dan Fredrickson is offline  
Old 05-05-2018, 03:26 PM
  #2  
Sponsor
Thread Starter
 
Dan Fredrickson's Avatar
 
Join Date: Mar 2008
Location: Sacramento (Rubicon) Ca
Posts: 2,087
Default

Configure it the way that works best for YOUR rig!
Dan Fredrickson is offline  
Old 05-12-2018, 11:27 AM
  #3  
Sponsor
Thread Starter
 
Dan Fredrickson's Avatar
 
Join Date: Mar 2008
Location: Sacramento (Rubicon) Ca
Posts: 2,087
Default

You've got the best 1 ton axle out there... why not have the best steering??
Dan Fredrickson is offline  
Old 07-23-2018, 09:22 PM
  #4  
Sponsor
Thread Starter
 
Dan Fredrickson's Avatar
 
Join Date: Mar 2008
Location: Sacramento (Rubicon) Ca
Posts: 2,087
Default

There is a right one for everybody, let us know if you need help choosing!
Dan Fredrickson is offline  
Old 08-18-2018, 01:12 PM
  #5  
Sponsor
Thread Starter
 
Dan Fredrickson's Avatar
 
Join Date: Mar 2008
Location: Sacramento (Rubicon) Ca
Posts: 2,087
Default

Whatever setup you're running or wanting to run, we can help make it happen!
Dan Fredrickson is offline  
Old 01-11-2019, 03:32 PM
  #6  
Sponsor
Thread Starter
 
Dan Fredrickson's Avatar
 
Join Date: Mar 2008
Location: Sacramento (Rubicon) Ca
Posts: 2,087
Default

Epic steering for epic axles!
Dan Fredrickson is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dan Fredrickson
Vendor Showcase
0
11-10-2017 03:28 PM
ClydesdaleKevin
Modified XJ Cherokee Tech
7
07-25-2017 03:03 PM
Dan Fredrickson
Vendor Showcase
12
08-07-2013 02:58 PM
ironmanandy
Vendor Showcase
10
12-20-2009 07:10 PM
WJCraig
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
07-06-2008 02:36 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: Beefy Dana 60 Steering options @ Ruffstuff!


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.