Pre97 woodgrain dash
#2
Senior Member
Join Date: Mar 2012
Location: Racine, WI
Posts: 974
Likes: 0
Received 8 Likes
on
7 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
At least Wagoneers, Briarwoods, Limiteds, and Countries could have them (also had faux wood on interior door panels). Not sure if others like Pioneer, Laredo, etc could have it or not. I've seen two distinctly different grains throughout the years--an earlier, lighter one with metal accenting and a later, darker one without any accents.
Last edited by mschi772; 02-28-2015 at 02:40 PM.
#3
CF Veteran
Thread Starter
Join Date: Jan 2015
Location: Minnesota
Posts: 2,152
Likes: 0
Received 7 Likes
on
7 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
At least Wagoneers, Briarwoods, Limiteds, and Countries could have them (also had faux wood on interior door panels). Not sure if others like Pioneer, Laredo, etc could have it or not. I've seen two distinctly different grains throughout the years--an earlier, lighter one with metal accenting and a later, darker one without any accents.
#4
Senior Member
Join Date: Mar 2012
Location: Racine, WI
Posts: 974
Likes: 0
Received 8 Likes
on
7 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Last edited by mschi772; 02-28-2015 at 03:59 PM.
#5
Senior Member
Join Date: Mar 2012
Location: Racine, WI
Posts: 974
Likes: 0
Received 8 Likes
on
7 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Oh, and here is a 3rd slight variation on the dash piece I found in a Briarwood. No metallic accenting, a medium tone, and looks like some moulding around the openings.
#7
CF Veteran
Join Date: Jan 2015
Location: Southern Maryland
Posts: 1,381
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 1999 4.0L
I got a full set from a Country model, looks pretty good with the late model console and my S10 seats
Another option now is to hydro-dip a wood grain pattern
https://www.google.com/search?q=hydr...utf-8&oe=utf-8
Another option now is to hydro-dip a wood grain pattern
https://www.google.com/search?q=hydr...utf-8&oe=utf-8
Trending Topics
#8
CF Veteran
Thread Starter
Join Date: Jan 2015
Location: Minnesota
Posts: 2,152
Likes: 0
Received 7 Likes
on
7 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
I got a full set from a Country model, looks pretty good with the late model console and my S10 seats Another option now is to hydro-dip a wood grain pattern https://www.google.com/search?q=hydr...utf-8&oe=utf-8
#9
Senior Member
Join Date: Mar 2012
Location: Racine, WI
Posts: 974
Likes: 0
Received 8 Likes
on
7 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Make sure you can see all sides of them very clearly--especially where a driver might rest their arm on top of the door. The top of my driver's piece was worn-out. I figure sun damage and the rubbing of a driver's arm resting on it all the time cause the pattern in that area to be worn away. My other doors' pieces were fine.
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
02-27-2023 03:38 PM
pmd1995
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
07-29-2017 07:58 AM
Cherokee_of_Tennessee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-30-2015 12:10 PM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-29-2015 08:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)