Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

no heat still after new blower motor

Thread Tools
 
Search this Thread
 
Old 11-25-2014, 08:10 PM
  #1  
Junior Member
Thread Starter
 
dudeimdano's Avatar
 
Join Date: Apr 2010
Location: north jerz / poconos
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 strait six
Default no heat still after new blower motor

I just replaced the blower motor an hour ago still no heat. I get heat on defrost when im moving faster that 45 so I know its not the heater core... possible switch or resistor any ideas and how to tell what it is would be helpful thanks.
Old 11-25-2014, 08:15 PM
  #2  
Junior Member
Thread Starter
 
dudeimdano's Avatar
 
Join Date: Apr 2010
Location: north jerz / poconos
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 strait six
Default

this is also a 95 xj if that makes a difference
Old 11-26-2014, 05:50 AM
  #3  
CF Veteran
 
caged's Avatar
 
Join Date: Nov 2008
Location: Northern Ontario, Canada
Posts: 7,874
Received 94 Likes on 85 Posts
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
Default

don't rule out the heater core just yet...

do a simple back flush, see how that goes.
Old 11-26-2014, 07:10 AM
  #4  
::CF Moderator::
 
cruiser54's Avatar
 
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes on 1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

This system must work correctly:

I would eliminate the heater control valve as it could be clogged/partially closed/and is not needed anyway.
Attached Thumbnails no heat still after new blower motor-vac-ball-routing.jpg  
Old 11-26-2014, 07:28 AM
  #5  
Senior Member
 
Kingfisher's Avatar
 
Join Date: Mar 2014
Location: Central Indiana
Posts: 552
Likes: 0
Received 0 Likes on 0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Default

Originally Posted by dudeimdano
I just replaced the blower motor an hour ago still no heat. I get heat on defrost when im moving faster that 45 so I know its not the heater core... possible switch or resistor any ideas and how to tell what it is would be helpful thanks.
Evidently the blower isn't working for whatever reason. Fuse, Switch, Bad ground
Old 11-26-2014, 07:32 AM
  #6  
Member
 
RSWiser's Avatar
 
Join Date: Dec 2011
Location: Utah
Posts: 226
Likes: 0
Received 2 Likes on 2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Default

The control of the vents is managed by the vacuum system.
Check you vacuum lines to make sure you don't have any leaks.
That was my problem.

RSWiser
Old 11-27-2014, 07:41 PM
  #7  
Junior Member
Thread Starter
 
dudeimdano's Avatar
 
Join Date: Apr 2010
Location: north jerz / poconos
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 strait six
Default

the connector for the switch is melted probably the cause so just to get my through the winter I ran the blower motor to a toggle switch and to the battery when I get time ill get a new harness thanks for the info people.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew20jackson
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-15-2015 11:27 PM
Danny_XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-14-2015 08:42 PM
Andrew20jackson
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-14-2015 05:28 PM
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 03:06 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: no heat still after new blower motor



All times are GMT -5. The time now is 02:12 AM.