Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

01 new motor - trans doesn't work - HELP

Thread Tools
 
Search this Thread
 
Old 08-30-2016, 09:20 AM
  #1  
Newbie
Thread Starter
 
Sharps's Avatar
 
Join Date: Nov 2013
Location: SW Montana
Posts: 22
Likes: 0
Received 2 Likes on 2 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 six
Default 01 new motor - trans doesn't work - HELP

I just rebuilt my 01 Cherokee sport motor.
Started fine once - then the crank position sensor failed. After troubleshooting I found the problem and replaced it (PITA).
Loose ground made so my code reader was dark - fixed that.
Now, engine runs fine but when I put it in gear (auto trans) - nothing.
Any help for what could be happening? All fuses are good and I can see no broken or loose wires. Is there a relay that could have given up or could this be the TCM? Is there a connection to the throttle body?
Please help as this is frustrating as hell.
Old 08-30-2016, 10:29 AM
  #2  
Senior Member
 
dans98xj's Avatar
 
Join Date: Nov 2013
Location: Vernon NJ
Posts: 616
Likes: 0
Received 3 Likes on 3 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Default

The connection to the transmission is a mechanical one. Check the shift linkage from the shifter down to the transmission. The connection is on the drivers side of the trans. Also check that the torque converter bolts are attached to the flex plate. If the torque converter is not spinning the transmission will not go anywhere.
Old 08-30-2016, 04:08 PM
  #3  
CF Veteran
 
Turbo X_J's Avatar
 
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes on 16 Posts
Year: My Jeep is a GMC
Default

Originally Posted by Sharps
Is there a connection to the throttle body?
TV cable.

How did you install the torque converter?
Old 08-30-2016, 05:17 PM
  #4  
::CF Moderator::
 
cruiser54's Avatar
 
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,876
Received 1,526 Likes on 1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

Torque converter likely is not seated into the trans.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rampage
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
07-31-2020 02:25 PM
punkbug83
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-26-2017 01:24 PM
bryweb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
05-08-2016 12:24 AM
Dylan86cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-24-2016 01:01 PM
dfarr26
Introductions
0
12-29-2007 01:10 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 01 new motor - trans doesn't work - HELP



All times are GMT -5. The time now is 07:59 AM.