Anyone near the Northwest Suburbs willing to help with a front coil install? Or have a press I could pay you to use? Heck, I'd be willing to drive a while for some help... I don't have a garage and it's a bit cold to swap my coil springs outside with my crappy bottle jack.

I'd pay for help, I have the new springs, heavy duty compressors installed on them, just need a lift, a crowbar and some warm garage space!

 

Hello all I'm looking for some tires for my cousin. He is looking for a set of 33s or 32s. Craigslist has come up empty for me the past few weeks

 

Wheeling pictures from Winterfest 2017 in Attica, Indiana. Badlands Offroad Park.

 

new guy here from Alton. looking for the front headlight support because mine is not in usable condition anymore after it went head to head with a ford truck at about 30.funny thing is the rad never got a hole and i drove it home.drove straight too.

 

I wanted to get a cheap 3inch lift and need help installing it. If anyone is interested in making some money on the side it would be greatly appreciated. I'm located in McHenry il.

 

if you weren't 5 hours away I'd help. I did a 2 inch puck install and shackle relocation in a day. Includes the runs to the hardware store and time with a torch cutting the old leafs off.

 

Long shot, anybody looking to sell a set of 31-33" all terrains?

 

I'm buying new tires for my jeep next week. I have a set of BigO 31" all terrains on 2001 Ecco wheels. Good shape. Good tread. I'll send you a pic tomorrow if you're interested. I'm in Belleville just east of St. Louis.

 

New to the site, picked up a 1998 Xj about a week ago. So far have replaced parts to get her back on the road. New rear drums,shoes,springs and break lines, plugs, wires, distributer, rotor,coil,new sway bar links as the one on there were rusted off, led headlights, new air box, needed a new head light switch and front washer pump. Plan on putting a 4.5 inch lift in the near future with 32" tires, cut fenders and new fender flares to start. It all get addicting as things progress.
Tune up
Wheel cylinder in
Interior

Interior

 

is the blue XJ with hood pins yours ARES?
how hard is it to install those/ditch the stock hold down?

 

It's mine I run with ares fab. Unless your stock cable is broken I wouldnt bother. I only went to pins because of my bracket breaking off in the kick panel and it being a trail rig that gets the hood opened alot.

 

Danville here !

 

Danville Illinois here

 

I hope this is the proper place to pose the question. Will the head from my Jeep XJ year 2000 which houses the thrmostthe interchange with my brothers Jeep Cherokee Sport year 1995? Thanks in advance concerned brother.

 

I was considering just the opposite. I just bought a 2000 XJ with a bad head. I was wondering if the head from my 1994 would work on it. I just went to Advance Auto and with credits, I think I paid around $350 for a rebuilt.