by921's Photos

View Profile

All painted and I knew it would not look very good but ended up A little worse than I was hoping so I ordered Bedliner and painted it again. Also this has the wheels and tires that I decided on with the rubicon express 2 inch lift. Tires are 32 1150 cooper at3

All painted and I knew it would not look very good but ended up A little worse than I was hoping so I ordered Bedliner and painted it again. Also this has the wheels and tires that I decided on with the rubicon express 2 inch lift. Tires are 32 1150 cooper at3

0 2015/06/09 16:27:08 by921

Started to paint with regular tan paint

Started to paint with regular tan paint

0 2015/06/09 16:24:59 by921

Primed and bottom bedlinered, also testing tires with cut fenders and 31 1050s

Primed and bottom bedlinered, also testing tires with cut fenders and 31 1050s

0 2015/06/09 16:22:57 by921

Sanded and also testing tires with a 3inch jack lift
And on 31 1250s

Sanded and also testing tires with a 3inch jack lift And on 31 1250s

0 2015/06/09 16:20:52 by921

0 2015/06/09 16:19:58 by921

There were also a few holes in the floor, one of them was above the exhaust were the heat ruined the floor.

There were also a few holes in the floor, one of them was above the exhaust were the heat ruined the floor.

0 2015/06/09 16:08:30 by921

0 2015/06/09 16:07:54 by921

0 2015/06/09 16:02:03 by921

0 2015/06/09 16:01:16 by921

fixing holes in the floor

fixing holes in the floor

0 2015/05/14 14:50:11 by921

0 2015/05/14 14:50:00 by921

0 2015/05/14 14:49:45 by921

0 2015/05/14 14:49:25 by921

0 2015/05/14 14:49:10 by921

bedliner and 32 1050

bedliner and 32 1050

0 2015/05/14 14:48:59 by921

primer and on 31 1050

primer and on 31 1050

0 2015/05/14 14:48:43 by921

31 1250 no lfit

31 1250 no lfit

0 2015/05/14 14:48:29 by921

Tire check with cut fenders and 3 inch jack lift

Tire check with cut fenders and 3 inch jack lift

0 2015/05/14 14:48:17 by921

sanding before paint

sanding before paint

0 2015/05/14 14:48:03 by921

Page
9 of 9

Go To
Page

Go to page of 9 pages

1
2
3
4
5
6
7
8
9