Jeep Cherokee Forum
Fixed RE 3.5" LCA
Fixed RE 3.5" LCA
0 2017/09/16 19:12:02
0 2017/09/14 18:51:14
0 2017/08/25 18:31:56
0 2017/08/25 18:30:58
Almost new 35x12.50x15 TSL Super Swamper. Unfortunately with a DOT from 2000
Almost new 35x12.50x15 TSL Super Swamper. Unfortunately with a DOT from 2000
0 2017/08/23 13:09:22
Said Bronco was on 9" of lift. They plan on lowering it down to 4" with the 305/65/17s we put on.
Said Bronco was on 9" of lift. They plan on lowering it down to 4" with the 305/65/17s we put on.
0 2017/08/23 12:55:43
almost new 35x12.50x15 TSL Super Swamper, too bad the DOT is from 2000
almost new 35x12.50x15 TSL Super Swamper, too bad the DOT is from 2000
0 2017/08/23 12:54:42
0 2017/08/23 12:53:38
0 2017/08/23 12:53:01
0 2017/08/19 21:35:38
0 2017/08/19 21:35:16
0 2017/08/15 18:54:22
AresFab plug
AresFab plug
0 2017/08/15 18:51:22
Rushed painting in winter when I got the bumper and left the inside just primered and it started to rust. Sanded it down and layed a few coats of Krylon* rust enamel
Rushed painting in winter when I got the bumper and left the inside just primered and it started to rust. Sanded it down and layed a few coats of Krylon* rust enamel
0 2017/08/15 18:49:36
Yes that's the driveshaft on the ground. I may or may not have tried to test drive without it.
Yes that's the driveshaft on the ground. I may or may not have tried to test drive without it.
0 2017/08/15 18:48:36
Pretty sure if I move back a hole I can get alittle more lift
Pretty sure if I move back a hole I can get alittle more lift
0 2017/08/15 18:47:16
Scratched the paint :(
Scratched the paint :(
0 2017/08/09 21:35:32
Underneath the fuel hose is the bad rust I need to cut out and get new metal in.
Underneath the fuel hose is the bad rust I need to cut out and get new metal in.
0 2017/08/09 21:34:24
0 2017/08/08 17:34:21
Also started prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put in the "bushing". I have one on the way right now
Also started prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put in the "bushing". I have one on the way right now
0 2017/08/08 17:31:14
threw some paint on it. Had some trouble drilling the upper holes because the leaf spring wouldn't let me drill up for one of them. So there's a bigger hole now.
threw some paint on it. Had some trouble drilling the upper holes because the leaf spring wouldn't let me drill up for one of them. So there's a bigger hole now.
0 2017/08/08 17:28:28
Also started prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put in the "bushing". Have one on the wat right now. Yes it's color matched be quiet.
Also started prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put in the "bushing". Have one on the wat right now. Yes it's color matched be quiet.
0 2017/08/08 17:26:18
Also prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put the "bushing" in. Have one on the way right now. Yes it's color matched be quiet.
Also prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put the "bushing" in. Have one on the way right now. Yes it's color matched be quiet.
0 2017/08/08 17:23:30
Mock up for clearance and for the upper bolts to be drilled. The 2 nuts that hold the bumper on get in the way so I had to grind down part of the bracket so it sits nicely.
Mock up for clearance and for the upper bolts to be drilled. The 2 nuts that hold the bumper on get in the way so I had to grind down part of the bracket so it sits nicely.
0 2017/08/08 17:20:51
Hit it with the wire wheel to clean it up
Hit it with the wire wheel to clean it up
0 2017/08/08 17:19:51
Shackle box cut out and ground down. Had to cut it in a bunch of pieces as the leaf spring kept getting in the way
Shackle box cut out and ground down. Had to cut it in a bunch of pieces as the leaf spring kept getting in the way
0 2017/08/08 17:17:53
Started with the passenger side. Shackle bolts came out like butter thanks to anit sieze
Started with the passenger side. Shackle bolts came out like butter thanks to anit sieze
0 2017/08/08 17:14:29
worst position for a starter in the engine bay, so much crap build up.
worst position for a starter in the engine bay, so much crap build up.
0 2017/08/06 12:08:29
0 2017/07/30 15:22:52
0 2017/07/30 15:22:01
0 2017/07/23 15:19:49
0 2017/07/21 01:18:02
0 2017/07/13 22:16:10
0 2017/07/04 15:21:28
0 2017/06/18 19:17:03
0 2017/06/18 06:30:26
0 2017/06/18 06:28:58
0 2017/06/14 06:44:29
0 2017/06/13 22:23:20
0 2017/06/13 10:33:49