Jeep Cherokee Forum
5-90's wiring kit.
5-90's wiring kit.
0 2015/11/14 16:26:25
Hoses on,battery with new clamps,wires & sleeve on.
Hoses on,battery with new clamps,wires & sleeve on.
0 2015/11/05 14:40:15
New champion rad,condenser finally bolted into place.
New champion rad,condenser finally bolted into place.
0 2015/11/05 14:40:12
Hoses with therm sleeve on.
Hoses with therm sleeve on.
0 2015/11/05 14:40:08
This is a large vice grip!
This is a large vice grip!
0 2015/11/05 14:40:03
Home made oil filter adapter wrench.
Home made oil filter adapter wrench.
0 2015/11/01 21:55:15
Valve cover, new injector o rings,spark plugs installed.
Valve cover, new injector o rings,spark plugs installed.
0 2015/10/24 16:54:35
Rockers bolted on.
Rockers bolted on.
0 2015/10/24 16:54:33
Head going back on.
Head going back on.
0 2015/10/24 16:54:30
New paint & elbows.
New paint & elbows.
0 2015/09/26 18:19:13
All cleaned up.
All cleaned up.
0 2015/09/20 15:29:30
Paint remover took a few applications,but did a complete job.
Paint remover took a few applications,but did a complete job.
0 2015/09/20 15:29:22
0 2015/09/15 20:53:25
Heads off & deck cleaned up.
Heads off & deck cleaned up.
0 2015/09/15 20:50:13
Heads off & decks clean.
Heads off & decks clean.
0 2015/09/15 20:30:05
Exhaust manifold all cleaned up.
Exhaust manifold all cleaned up.
0 2015/09/15 20:30:01
Intake needs some work.
Intake needs some work.
0 2015/09/15 20:29:51
This is really dirty.
This is really dirty.
0 2015/09/15 20:29:44
Same
Same
0 2015/09/11 15:43:30
More milk chocolate
More milk chocolate
0 2015/09/11 15:43:19
Chocolate
Chocolate
0 2015/09/11 15:43:12
Beautiful welds on champion rad.
Beautiful welds on champion rad.
0 2015/09/08 09:25:31
Didn't touch this but clean as a whistle.
Didn't touch this but clean as a whistle.
0 2015/09/08 08:54:23
Again with a little milk on lifters.
Again with a little milk on lifters.
0 2015/09/08 08:54:13
0 2015/09/08 08:54:07
Done with brakes. They work great. Painted wheels while I was at it.
Done with brakes. They work great. Painted wheels while I was at it.
0 2015/08/30 09:24:51
To show position of leak.
To show position of leak.
0 2015/08/30 09:24:16
This amount leaked out while working on brakes. Passenger side,weeping from rad.
This amount leaked out while working on brakes. Passenger side,weeping from rad.
1 2015/08/30 09:23:50
Mounted without cap.
Mounted without cap.
0 2015/08/29 14:37:32
Pro comp wheel stamp
Pro comp wheel stamp
0 2015/08/29 14:37:29
Checking threads of lugs and nuts.
Checking threads of lugs and nuts.
0 2015/08/29 13:22:24
I spent 2 hours yesterday tapping the lug nuts. Every nut was stripped. What did the PO do to strip every single nut. 10 down,10 to go.
I spent 2 hours yesterday tapping the lug nuts. Every nut was stripped. What did the PO do to strip every single nut. 10 down,10 to go.
0 2015/08/29 11:22:09
This is the notch area. I coated it with disc brake lube.
This is the notch area. I coated it with disc brake lube.
0 2015/08/29 11:09:41
0 2015/08/29 11:06:45
Still on the bottom of the C. The "inside" of the knuckles is the worst for corrosion. It is to the right of my finger. You must file all the corrosion. Even though I had divits worn on the outside of the ridge on both of my knuckles,it was the inside that was completely corroded. I believe this was the major cause of the brakes sticking. We will find out tomorrow.
Still on the bottom of the C. The "inside" of the knuckles is the worst for corrosion. It is to the right of my finger. You must file all the corrosion. Even though I had divits worn on the outside of the ridge on both of my knuckles,it was the inside that was completely corroded. I believe this was the major cause of the brakes sticking. We will find out tomorrow.
0 2015/08/28 21:42:39
This is a shot of the bottom of knuckle,showing the ridge where the notch in the brake pad rides.
This is a shot of the bottom of knuckle,showing the ridge where the notch in the brake pad rides.
0 2015/08/28 21:42:33
Worn divit on bottom of knuckle. This is what the helpful members are referring to. With deep grooves,the proven fix being to weld the depressed area. Mine is not bad,so I am going to file the depression and all other areas,to give the pads a smooth surface to ride on. These areas must be lubed with disc brake lube also. I also cleaned up the pads backing plates.
Worn divit on bottom of knuckle. This is what the helpful members are referring to. With deep grooves,the proven fix being to weld the depressed area. Mine is not bad,so I am going to file the depression and all other areas,to give the pads a smooth surface to ride on. These areas must be lubed with disc brake lube also. I also cleaned up the pads backing plates.
0 2015/08/28 21:42:29
This is the divit that wears on the top of the knuckle.
This is the divit that wears on the top of the knuckle.
0 2015/08/28 21:42:24
Hang the caliper with wire or a zip tie.
Hang the caliper with wire or a zip tie.
0 2015/08/28 21:34:23
By removing the two 1/2" bolts.
By removing the two 1/2" bolts.
0 2015/08/28 21:34:13