Jeep Cherokee Forum
Oil filter adapter main o ring, this is most of the time what's cracked
Oil filter adapter main o ring, this is most of the time what's cracked
2 2011/11/26 18:22:53
Asslembled long block
Asslembled long block
2 2011/11/24 13:29:27
Freshened up 98 4.0 h.o. for the truck
Freshened up 98 4.0 h.o. for the truck
1 2011/11/24 13:29:27
Full bedliner exterior with 1/4 " plate full body armor
Full bedliner exterior with 1/4 " plate full body armor
1 2011/11/24 13:20:43
Exhaust with what I like to call mud powder coat
Exhaust with what I like to call mud powder coat
0 2011/11/26 18:22:53
Custom 62.5mm throttle body
Custom 62.5mm throttle body
0 2011/11/26 18:22:53
Screw that comes out of the center of.the adapter there are two o rings on here to replace. This takes a t60 torx socket on the newer style.and a 5/8 socket on the older style.
Screw that comes out of the center of.the adapter there are two o rings on here to replace. This takes a t60 torx socket on the newer style.and a 5/8 socket on the older style.
0 2011/11/26 18:06:07
Oil filter adaptor removed
Oil filter adaptor removed
0 2011/11/26 18:06:07
Here is the location of The sender. All you do is unplug it and unscrew it. Be sure to use sealer on the threads of a new one, I like liquid Teflon. But thread tape will work.
Here is the location of The sender. All you do is unplug it and unscrew it. Be sure to use sealer on the threads of a new one, I like liquid Teflon. But thread tape will work.
0 2011/11/26 17:56:56
Electronic oil pressure sending unit. It can leak at threads or connector( far left) or.where plastic and metal come.together. if you end up needing to remove it they sell a special socket, but a crescent wrench will do.the trick
Electronic oil pressure sending unit. It can leak at threads or connector( far left) or.where plastic and metal come.together. if you end up needing to remove it they sell a special socket, but a crescent wrench will do.the trick
0 2011/11/26 17:56:56
IMG 20111125 090743
IMG 20111125 090743
0 2011/11/25 21:05:01
300 k and on her way out
300 k and on her way out
0 2011/11/25 20:47:48
Newly sealed up adaptor.....no leaks here
Newly sealed up adaptor.....no leaks here
0 2011/11/25 20:47:48
Here is an engine removed from.the jeep and flipped upside down. The oil pan is also removed. This is the far rear of the engine, the rear main cap. The seal is located under there. Is requires that you remove the oil pan and rear main cap. All the rest of the caps must be loosened up. You can then drive the seal out with a punch. If u need detailed instructions let me know.
Here is an engine removed from.the jeep and flipped upside down. The oil pan is also removed. This is the far rear of the engine, the rear main cap. The seal is located under there. Is requires that you remove the oil pan and rear main cap. All the rest of the caps must be loosened up. You can then drive the seal out with a punch. If u need detailed instructions let me know.
0 2011/11/25 05:54:43
Assembling head
Assembling head
0 2011/11/25 05:54:43
New paint
New paint
0 2011/11/25 05:54:43
Fresh 355 roller, 700 r4 and Dana 300. All backed up.by a 9" out back and a d44 up front.
Fresh 355 roller, 700 r4 and Dana 300. All backed up.by a 9" out back and a d44 up front.
0 2011/11/24 13:20:43
0 2011/11/24 13:20:43
Bumper
Bumper
0 2011/11/24 12:47:10
Bumper
Bumper
0 2011/11/24 12:47:10
Fabbed up a new bumper
Fabbed up a new bumper
0 2011/11/24 12:47:10