Jeep Cherokee Forum
0 2025/11/07 11:01:45
0 2025/11/07 11:01:34
0 2025/11/07 10:46:36
Psc power steering kit that im gonna put on with the wife tonight. Prepping for a long trip in the george washington national forest, dispersed camping and constant driving to hit every trail. So far i have roughly 2000 miles between getting there, riding trails etc then going back home.
Psc power steering kit that im gonna put on with the wife tonight. Prepping for a long trip in the george washington national forest, dispersed camping and constant driving to hit every trail. So far i have roughly 2000 miles between getting there, riding trails etc then going back home.
0 2025/11/07 10:44:57
New windshield got put on but it was leaking heavily soooooo had to take some pics as evidence so 🤷 now its redone and doesnt leak but not a fan of having to take off dash panels.
New windshield got put on but it was leaking heavily soooooo had to take some pics as evidence so 🤷 now its redone and doesnt leak but not a fan of having to take off dash panels.
0 2025/11/07 10:43:40
New heater hose, OE style since the last one was a straight hose that rubbed the hood. Its not the most organizef looking engine bay but meh works for now.
New heater hose, OE style since the last one was a straight hose that rubbed the hood. Its not the most organizef looking engine bay but meh works for now.
0 2025/11/07 10:41:54
My super technical way of holding the axle to replace the uca with an IRO flex joint. Those guys have been super nice and helpful....cant say the same for other companies that said "should fit" then it didnt so i wasted money. IRO said yup and sure enough it fit perfect. Took a lot of time smashing the old one out but eventually got it to move enough to where i could get it pressed out with the ball joint press.
My super technical way of holding the axle to replace the uca with an IRO flex joint. Those guys have been super nice and helpful....cant say the same for other companies that said "should fit" then it didnt so i wasted money. IRO said yup and sure enough it fit perfect. Took a lot of time smashing the old one out but eventually got it to move enough to where i could get it pressed out with the ball joint press.
0 2025/11/07 10:39:38
0 2025/09/23 07:38:34
0 2025/09/23 07:38:06
0 2025/09/21 11:40:23
Not perfect but por15 works and its for function not form meh
Not perfect but por15 works and its for function not form meh
0 2025/09/21 11:40:19
New metal welded in and seam sealer on top so i can finally stop driving the wife around once the windshield goes in asap! And when i get home ill get some pictures of my por15 adventure with black hands
New metal welded in and seam sealer on top so i can finally stop driving the wife around once the windshield goes in asap! And when i get home ill get some pictures of my por15 adventure with black hands
0 2025/09/21 07:39:43
Did the over the axle from cav fab last night, only drove it home but felt way less on the bump steer so will have to really drive it once the windshield goes in and come back
Did the over the axle from cav fab last night, only drove it home but felt way less on the bump steer so will have to really drive it once the windshield goes in and come back
0 2025/09/21 07:39:04
0 2025/09/15 19:31:11
So windshield was removed and the guy found a hole....hell yea its only paper right???? More money 💰 im gonna do as much as i can myself sanding all the little rude red rust bunches so the guy will just have to weld in some new metal 😑 im getting poor at this point 😆 i have another car im building fyi this is her daily
So windshield was removed and the guy found a hole....hell yea its only paper right???? More money 💰 im gonna do as much as i can myself sanding all the little rude red rust bunches so the guy will just have to weld in some new metal 😑 im getting poor at this point 😆 i have another car im building fyi this is her daily
0 2025/09/15 19:31:08
0 2025/09/15 19:31:05
Bazinga, they are bright
Bazinga, they are bright
0 2025/09/15 19:31:02
Of course i did both sides 🙄 those oem bulbs got HOT like holy hell how do they not catch fire?????
Of course i did both sides 🙄 those oem bulbs got HOT like holy hell how do they not catch fire?????
0 2025/09/15 19:31:00
Hey look carpet, no rust.... remember yes no rust only good carpet Oh hey LED courtesy lights!!! Yes focus on those that i just installed 😉😘
Hey look carpet, no rust.... remember yes no rust only good carpet Oh hey LED courtesy lights!!! Yes focus on those that i just installed 😉😘
0 2025/09/15 19:30:55
Ope lets not look under there.....we will just put this back down for now.... good good nobody saw anything right?
Ope lets not look under there.....we will just put this back down for now.... good good nobody saw anything right?
0 2025/09/15 19:30:50
0 2025/09/15 19:30:45
0 2025/09/15 19:30:42
0 2025/09/15 19:30:39
Playing the rust hunter and finding any rust to destroy
Playing the rust hunter and finding any rust to destroy
0 2025/09/15 19:30:35
0 2025/09/15 19:28:09
Put it back in with a buddy oof much easier now we have vents, wife said she couldve been fine in the winter with just defrost..... ive done it before and uh no it sucks 😐
Put it back in with a buddy oof much easier now we have vents, wife said she couldve been fine in the winter with just defrost..... ive done it before and uh no it sucks 😐
0 2025/09/15 19:25:11
Got everything pulled apart, all on my own (go me?) It sucked, have friends
Got everything pulled apart, all on my own (go me?) It sucked, have friends
0 2025/09/15 19:25:08
Vacuum line was toasted so makes sense why no vent control, i got all the lines in the engine bay replaced with silicon but cant find a pic so youll just have to believe me
Vacuum line was toasted so makes sense why no vent control, i got all the lines in the engine bay replaced with silicon but cant find a pic so youll just have to believe me
0 2025/09/15 19:25:05
This was the oil pan gasket, pretty sure you dont need to use the whole tube of rtv just 4 dabs if anything but i didnt use any rtv at all and so far no leaks so maybe lucky me? If i have to ill just drop the pan clean it then put a little dab in the spots that need it
This was the oil pan gasket, pretty sure you dont need to use the whole tube of rtv just 4 dabs if anything but i didnt use any rtv at all and so far no leaks so maybe lucky me? If i have to ill just drop the pan clean it then put a little dab in the spots that need it
0 2025/09/15 19:20:05
0 2025/09/15 19:20:02
So had to go back and do the rear main seal for the 3rd time since i paid a shop that is supposedly a specialty off road shop BUT THEY COULDNT EVEN TELL ME WHAT AXLES WERE ON THE JEEP which i googled around and asked a guy that instantly told me. Shawn@lugnut4x4 you are the best person ever. The guy helped me beyond measure to figure out all the parts on this thing. Ahem sorry i got angry last night because now we are getting caught up here and shops cant accomplish anything
So had to go back and do the rear main seal for the 3rd time since i paid a shop that is supposedly a specialty off road shop BUT THEY COULDNT EVEN TELL ME WHAT AXLES WERE ON THE JEEP which i googled around and asked a guy that instantly told me. Shawn@lugnut4x4 you are the best person ever. The guy helped me beyond measure to figure out all the parts on this thing. Ahem sorry i got angry last night because now we are getting caught up here and shops cant accomplish anything
0 2025/09/15 19:19:58
0 2025/09/15 19:13:43
You can spy the new front driveshaft, they were both cooked!!!! Like holy hell how did it make it home? Both axles shot. Front driveshaft wiggled lol.... rear driveshaft was uhhhh dead also double cardan was just demolished so thats why both are new
You can spy the new front driveshaft, they were both cooked!!!! Like holy hell how did it make it home? Both axles shot. Front driveshaft wiggled lol.... rear driveshaft was uhhhh dead also double cardan was just demolished so thats why both are new
0 2025/09/15 19:13:40
Dual steering stabilizer from rough country that is so old the directions looked like they were from the 90s but it works
Dual steering stabilizer from rough country that is so old the directions looked like they were from the 90s but it works
0 2025/09/15 19:13:37
Went with a thick wall in case it bonks a rock because eh why not!
Went with a thick wall in case it bonks a rock because eh why not!
0 2025/09/15 19:13:33
New rear driveshaft
New rear driveshaft
0 2025/09/15 19:13:30
Got the steering brace done, wife had been helping more and more as she has warmed up to working on cars at this point
Got the steering brace done, wife had been helping more and more as she has warmed up to working on cars at this point
0 2025/09/15 19:13:28
0 2025/09/15 19:07:29
All new everything, its just paper right?
All new everything, its just paper right?
0 2025/09/15 19:07:26
Spindle was so cooked that it went in the bin
Spindle was so cooked that it went in the bin
0 2025/09/15 19:07:24