Jeep Cherokee Forum
Still working .. Snorkel ,3 core rad,Sye,adams driveshaft,tie rod Grand,etc etc.. Not done so yes legging it and alighnment still. Jeep Xstreme on youtube.
Still working .. Snorkel ,3 core rad,Sye,adams driveshaft,tie rod Grand,etc etc.. Not done so yes legging it and alighnment still. Jeep Xstreme on youtube.
0 2017/05/23 18:14:40
Start 3.5 RE and 8.25 swap
Start 3.5 RE and 8.25 swap
0 2017/05/23 18:13:30
Muncie sm420 for my 2000 2dr is the plan now. Novak adapter etc.. planning on this winter getting this together some more!!! Small tractor!!!
Muncie sm420 for my 2000 2dr is the plan now. Novak adapter etc.. planning on this winter getting this together some more!!! Small tractor!!!
0 2016/11/01 16:15:26
Muncie sm420 for my 2000 2dr. Novak adapter etc.. planning on this winter getting this together some more!!!
Muncie sm420 for my 2000 2dr. Novak adapter etc.. planning on this winter getting this together some more!!!
0 2016/11/01 16:12:55
Couldnt resist 99 4.0 4x4 auto 4spd... daily driver to help roate with the camanche!
Couldnt resist 99 4.0 4x4 auto 4spd... daily driver to help roate with the camanche!
0 2016/11/01 15:40:55
Couldnt resist another daily driver....99 4.0 ... auto 4spd. 4x4.
Couldnt resist another daily driver....99 4.0 ... auto 4spd. 4x4.
0 2016/11/01 15:39:05
Both mounts pressed in and installed. Now to get the manual flywheel and clutch setup bought and mounted for my tranny i decide to choose.
Both mounts pressed in and installed. Now to get the manual flywheel and clutch setup bought and mounted for my tranny i decide to choose.
0 2016/09/05 14:30:39
1 down. Looks to work great!
1 down. Looks to work great!
0 2016/08/28 15:43:08
Almost done.
Almost done.
0 2016/08/27 15:36:13
Had time! Sparyed it. Yes i sprayed it. I have done fabric on other rig and decided this route.. turned out pretty decent.
Had time! Sparyed it. Yes i sprayed it. I have done fabric on other rig and decided this route.. turned out pretty decent.
0 2016/08/27 15:35:49
This was interesting.. posted on another thread i made. Works!
This was interesting.. posted on another thread i made. Works!
0 2016/08/27 15:34:31
This is the route i went! Jeep Grand cherokee v8 isolators . The catch is they have a 1/2 inch bolt hole , at least mine do. The original bolt diameter on my rig is 7/16 so i got some spacers to change them to 1/2. They look too work fine. I could have drilled the engine side mounts to except new bolts also, but decided to go this route. Now to the bench vice!!
This is the route i went! Jeep Grand cherokee v8 isolators . The catch is they have a 1/2 inch bolt hole , at least mine do. The original bolt diameter on my rig is 7/16 so i got some spacers to change them to 1/2. They look too work fine. I could have drilled the engine side mounts to except new bolts also, but decided to go this route. Now to the bench vice!!
0 2016/08/27 15:26:39
Waiting on head. I have everything else but tranny decesions. I planned on a ax15 but ? Will see.
Waiting on head. I have everything else but tranny decesions. I planned on a ax15 but ? Will see.
0 2016/08/13 16:59:17
Sorry guys im partial to green , planned red but i couldnt do it! Double roller installed...I have some build on youtube.
Sorry guys im partial to green , planned red but i couldnt do it! Double roller installed...I have some build on youtube.
0 2016/08/13 16:58:37
Around Inch and 7/8
Around Inch and 7/8
0 2016/02/21 15:30:49
Around 3 1/2 diameter....inside isolater
Around 3 1/2 diameter....inside isolater
0 2016/02/21 15:28:41
I will have to fab it if no luck!!!
I will have to fab it if no luck!!!
0 2016/02/21 07:53:32
0 2016/02/19 16:42:57
0 2016/02/19 16:29:50
0 2016/02/19 16:27:40
0 2016/02/19 16:26:35
Picts for reference.
Picts for reference.
0 2016/02/19 16:25:22
Fresh Block after 15 years of abuse! Waiting on RB Kit and then assmebly and paint will begin hopfully !!
Fresh Block after 15 years of abuse! Waiting on RB Kit and then assmebly and paint will begin hopfully !!
0 2016/02/19 16:11:03
Cleaning and sent Engine in yesterday to Machine Shop!! All looks good besides the head being toast and they want about the same to redo a head as a new 1... so im debating another Promaxx head...
Cleaning and sent Engine in yesterday to Machine Shop!! All looks good besides the head being toast and they want about the same to redo a head as a new 1... so im debating another Promaxx head...
0 2016/02/16 15:34:15
Cleaning the jeep up for engine mounts and some painting on engine bay... nothing fancy as im not doing a restoration...but i want to make it look nice and make sure i can keep it rust free ! Helps i live in Arkansas .
Cleaning the jeep up for engine mounts and some painting on engine bay... nothing fancy as im not doing a restoration...but i want to make it look nice and make sure i can keep it rust free ! Helps i live in Arkansas .
0 2016/02/14 15:44:45
Is dirty tho!
Is dirty tho!
0 2016/02/14 15:44:18
No rust on body.
No rust on body.
0 2016/02/14 15:43:39
Well after exam head its appears obvious its cracked!!If you look at this pict u can see it in the middle area and the valves are Shot!!! Lol, I could get discouraged but nothing will change! Luckily i have saved a head from previous build on 1 my Comanches ..will see if its any good i guess! Now keep degreasing and start to order all the goodies for rebuild hopfully soon.. wait to see how block looks at shop.
Well after exam head its appears obvious its cracked!!If you look at this pict u can see it in the middle area and the valves are Shot!!! Lol, I could get discouraged but nothing will change! Luckily i have saved a head from previous build on 1 my Comanches ..will see if its any good i guess! Now keep degreasing and start to order all the goodies for rebuild hopfully soon.. wait to see how block looks at shop.
0 2016/02/14 14:08:48
Well block is almost ready to load up for tomorrow!!
Well block is almost ready to load up for tomorrow!!
0 2016/02/14 14:07:44
Degrease degrease!!!!!! Im taking Block and head to Machine Shop Monday Am for further inspection and hopfully bore etc!! . I will be prepping all used parts such as oil pan and timing chain cover etc.. and getting paint... I will eventually be painting this rig a titanium finish with black accents way down the road! Any ideas on motor colrs are welcome???? I was thinking somthing light colored , so i can see oil leaks etc??
Degrease degrease!!!!!! Im taking Block and head to Machine Shop Monday Am for further inspection and hopfully bore etc!! . I will be prepping all used parts such as oil pan and timing chain cover etc.. and getting paint... I will eventually be painting this rig a titanium finish with black accents way down the road! Any ideas on motor colrs are welcome???? I was thinking somthing light colored , so i can see oil leaks etc??
0 2016/02/12 16:11:56
Done for today.. now clean my messy self up before the wife gets home!!!!
Done for today.. now clean my messy self up before the wife gets home!!!!
0 2016/02/09 16:55:43
Cam removal! Slide out careful ..doesnt look bad but will see later..
Cam removal! Slide out careful ..doesnt look bad but will see later..
0 2016/02/09 16:54:43
Looking and piston that has hole is in tack!!! Just skirt and hole...LoL..
Looking and piston that has hole is in tack!!! Just skirt and hole...LoL..
0 2016/02/09 16:53:19
Slide them out !!!
Slide them out !!!
0 2016/02/09 16:52:28
Only Piece in tack and worn!!
Only Piece in tack and worn!!
0 2016/02/09 16:51:34
See marks possibly..I can...
See marks possibly..I can...
0 2016/02/09 16:50:25
REPLACE THE TIMING CHAINS!!! THATS WHAT CAUSED THIS PROBLEM! TENSIONER WAS IN PEICES AND CHAIN HAD TO MUCH SLACK ..SKIPPED A COG AND BAM! COVER HAD SOME CHAIN MARKS BUT NOTHING MAJOR...
REPLACE THE TIMING CHAINS!!! THATS WHAT CAUSED THIS PROBLEM! TENSIONER WAS IN PEICES AND CHAIN HAD TO MUCH SLACK ..SKIPPED A COG AND BAM! COVER HAD SOME CHAIN MARKS BUT NOTHING MAJOR...
0 2016/02/09 16:47:42
Puller!! Went well!!
Puller!! Went well!!
0 2016/02/09 16:47:08
Well thats all for today ...have to chill and work tomorrow so have to wait! I need a good degreaser!!!!!!!!!!
Well thats all for today ...have to chill and work tomorrow so have to wait! I need a good degreaser!!!!!!!!!!
0 2016/02/08 17:46:12
Its on the stand..
Its on the stand..
0 2016/02/08 17:44:53