Jeep Cherokee Forum
0 2018/05/10 05:24:02
0 2018/05/10 05:23:50
0 2018/04/25 19:29:21
0 2018/04/25 19:29:18
0 2018/04/25 19:29:14
0 2018/04/25 19:29:10
0 2018/04/25 19:29:03
0 2018/04/25 19:29:00
0 2018/04/25 19:28:56
0 2018/04/25 19:28:52
0 2018/04/25 19:28:47
0 2018/04/25 19:28:43
0 2018/04/25 19:28:39
0 2018/04/25 19:28:24
0 2018/04/25 19:28:16
0 2018/04/25 19:28:07
0 2018/04/25 19:28:00
0 2018/04/10 09:35:27
0 2018/04/10 09:35:23
0 2018/04/10 09:35:20
0 2018/04/10 09:35:16
0 2018/04/10 09:35:10
Shot of the backside of the switch - tiny terminals.
Shot of the backside of the switch - tiny terminals.
0 2018/04/10 09:30:29
Wiring nightmare - I'll clean this up eventually. I keep saying that - HAHA.
Wiring nightmare - I'll clean this up eventually. I keep saying that - HAHA.
0 2018/04/10 09:30:24
Switch does not control starter directly. The switch is wired to a relay that controls the starter.
Switch does not control starter directly. The switch is wired to a relay that controls the starter.
0 2018/04/10 09:30:19
Push button ignition switch only works with ignition switch in the "ON" position.
Push button ignition switch only works with ignition switch in the "ON" position.
0 2018/04/10 09:30:15
Nicked the edge of the console while cutting the hole, oh well.
Nicked the edge of the console while cutting the hole, oh well.
0 2018/04/10 09:30:08
No more clunking noise when going over bumps.
No more clunking noise when going over bumps.
0 2018/04/07 15:01:20
New mount installed - cleaned up the mounting plate and the cross-member and reinstalled.
New mount installed - cleaned up the mounting plate and the cross-member and reinstalled.
0 2018/04/07 15:01:17
The old mount was very rusty on the mounting flange. Chunks of rust fell off when I removed it and the flange was bowed/heaved out.
The old mount was very rusty on the mounting flange. Chunks of rust fell off when I removed it and the flange was bowed/heaved out.
0 2018/04/07 15:01:11
0 2018/04/07 15:01:06
0 2018/04/07 15:00:59
0 2018/04/07 15:00:41
0 2018/04/07 15:00:36
Old mount vs New mount
Old mount vs New mount
0 2018/04/07 15:00:31
Old mount removed - very crusty underneath the mount plate. Cleaned up the area with a wire brush.
Old mount removed - very crusty underneath the mount plate. Cleaned up the area with a wire brush.
0 2018/04/07 15:00:19
Old mount removed - very crusty underneath the mount plate. Cleaned up the area with a wire brush.
Old mount removed - very crusty underneath the mount plate. Cleaned up the area with a wire brush.
0 2018/04/07 14:54:27
0 2018/03/17 20:01:23
0 2018/03/17 20:01:17
0 2018/03/17 20:01:13