Jeep Cherokee Forum
Sliders
Sliders
0 2010/02/05 11:43:48
offroading
offroading
0 2010/01/08 08:35:28
100 6437
100 6437
0 2010/01/02 16:17:22
100 6142
100 6142
0 2010/01/02 16:17:22
100 6425
100 6425
0 2010/01/02 16:16:11
100 6428
100 6428
2 2010/01/02 16:16:11
100 6143
100 6143
0 2010/01/02 16:16:11
100 6134
100 6134
0 2010/01/02 16:16:11
100 6131
100 6131
0 2010/01/02 16:16:11
100 6429
100 6429
0 2010/01/02 16:12:19
100 6158
100 6158
0 2010/01/02 16:12:19
100 6434
100 6434
0 2010/01/02 16:12:19
100 6432
100 6432
0 2010/01/02 16:12:19
100 6427
100 6427
0 2010/01/02 16:12:19
100 6160
100 6160
0 2010/01/02 16:08:50
100 6150
100 6150
0 2010/01/02 16:08:50
100 6148
100 6148
0 2010/01/02 16:08:50
100 6133
100 6133
0 2010/01/02 16:08:50
100 6129
100 6129
0 2010/01/02 16:05:51
100 6128
100 6128
0 2010/01/02 16:05:51
100 6127
100 6127
0 2010/01/02 16:05:51
100 6126
100 6126
1 2010/01/02 16:05:51
100 6125
100 6125
0 2010/01/02 16:05:51
I used a 2 inch, 3/16 inch thick square tubing. I cut one side off and rounded it. It fits the link pretty good and provides a good shoulder for the pin to rest on.
I used a 2 inch, 3/16 inch thick square tubing. I cut one side off and rounded it. It fits the link pretty good and provides a good shoulder for the pin to rest on.
0 2009/12/17 10:25:23
Here is how they came out. I used a 4 1/2 inch long 1/2 inch grade 5 bolt as my pin. Cut off before the threads and drill a hole through it. Over all added extension around is 3 1/2 inches which is perfect for my lift. Adjustments can be made by adding washers to the bolt that mounts bracket to the sway bar.
Here is how they came out. I used a 4 1/2 inch long 1/2 inch grade 5 bolt as my pin. Cut off before the threads and drill a hole through it. Over all added extension around is 3 1/2 inches which is perfect for my lift. Adjustments can be made by adding washers to the bolt that mounts bracket to the sway bar.
0 2009/12/17 10:25:23
Thought they might work better if they were straight so I made a jig to align them and put them in a vise.
Thought they might work better if they were straight so I made a jig to align them and put them in a vise.
0 2009/12/17 10:25:23
Cut first link before bend and the second after the bend and matched them up. It adds about 1 1/2 inches to total length.
Cut first link before bend and the second after the bend and matched them up. It adds about 1 1/2 inches to total length.
0 2009/12/17 10:25:23