Jeep Cherokee Forum
0 2015/08/03 16:07:23
0 2015/07/18 06:34:17
0 2015/07/18 03:21:28
0 2015/07/18 03:20:33
I still haven't got pic's after fitting it back on with new lower recessed winch cradle As I've said before on another thread it's made of 1/4" flat and only cost me $100 for the Steel
I still haven't got pic's after fitting it back on with new lower recessed winch cradle As I've said before on another thread it's made of 1/4" flat and only cost me $100 for the Steel
0 2015/07/17 02:46:34
0 2015/07/14 01:20:49
I've cut the flange off the top offcut and flipped it, welded to the bottom flange to increase strength them spaced it 1/4" off the original cover for clearance
I've cut the flange off the top offcut and flipped it, welded to the bottom flange to increase strength them spaced it 1/4" off the original cover for clearance
0 2015/07/10 17:56:23
0 2015/07/10 17:24:34
0 2015/07/10 17:09:32
0 2015/07/10 17:08:24
0 2015/07/09 07:35:10
0 2015/07/09 07:34:16
0 2015/07/09 07:33:28
0 2015/07/09 07:29:13
0 2015/07/09 07:25:35
0 2015/07/09 07:18:05
0 2015/07/09 06:47:03
I'm building my "Dream CJ6 ” and the next build I'll be using a spare script body on my own fabricated frame
I'm building my "Dream CJ6 ” and the next build I'll be using a spare script body on my own fabricated frame
1 2015/07/01 20:36:30
Covering the tires is important to keep the fun police off my back in our state
Covering the tires is important to keep the fun police off my back in our state
0 2015/06/28 18:36:46
0 2015/06/28 18:34:37
0 2015/06/28 18:34:17
0 2015/06/28 03:56:35
0 2015/06/28 03:52:36
Stepped it up to 33's
Stepped it up to 33's
0 2015/06/28 03:50:03
0 2015/06/28 03:43:40
About to cut out the wheel arches
About to cut out the wheel arches
0 2015/06/28 03:35:43
0 2015/06/26 05:44:21
0 2015/06/25 08:12:56
0 2015/06/25 07:08:24
0 2015/06/21 18:21:06
0 2015/06/21 18:16:58
A few years back I got sick of struggling to break the bead when changing/ cleaning mud out of tires so made a bracket to mount the hi-lift jack to the shed frame...... Bingo, jacks down and pop goes the bead
A few years back I got sick of struggling to break the bead when changing/ cleaning mud out of tires so made a bracket to mount the hi-lift jack to the shed frame...... Bingo, jacks down and pop goes the bead
0 2015/04/12 15:47:37
I mounted a spare 12v 150lpm compressor on a 12L tank with auto on/off pressure switch
I mounted a spare 12v 150lpm compressor on a 12L tank with auto on/off pressure switch
0 2015/04/12 15:37:33
Quick release for rear mud flaps
Quick release for rear mud flaps
0 2015/04/11 17:40:04
Quick disco mudflap to keep the Aussie Fun Police happy
Quick disco mudflap to keep the Aussie Fun Police happy
0 2015/04/11 17:38:01
Tablet in place
Tablet in place
0 2015/04/11 17:29:45
10" Tablet Mount that swivels for passenger to watch movies + my navi'n'trail recorder, music & internet......super ridged and no flex or shake
10" Tablet Mount that swivels for passenger to watch movies + my navi'n'trail recorder, music & internet......super ridged and no flex or shake
0 2015/04/11 17:24:47
Circuit Breaker & Control Box (relays + under voltage shutdown/alarm)
Circuit Breaker & Control Box (relays + under voltage shutdown/alarm)
0 2015/04/11 17:20:47
One of two compressor mounts and bolt in after the box is fitted
One of two compressor mounts and bolt in after the box is fitted
0 2015/04/11 16:41:44
Test fit and check where to mount compressors (twin 150LPM to run air tools)....Receiver Tank (12Litre) was mounted in the middle with 75a/h batts fit either to balance the weight over the axle
Test fit and check where to mount compressors (twin 150LPM to run air tools)....Receiver Tank (12Litre) was mounted in the middle with 75a/h batts fit either to balance the weight over the axle
0 2015/04/11 16:34:43