Jeep Cherokee Forum
0 2018/02/10 14:43:36
0 2018/02/11 14:36:10
0 2018/02/11 14:36:31
0 2018/02/11 14:36:56
0 2018/02/11 14:37:19
0 2018/02/13 05:12:43
0 2018/02/15 15:19:48
0 2018/02/28 15:52:59
0 2018/02/28 15:55:24
0 2018/02/28 15:56:27
0 2018/02/28 15:57:33
0 2018/02/28 15:58:19
0 2018/02/28 15:59:03
0 2018/02/28 15:59:38
0 2018/02/28 16:00:24
0 2018/02/28 16:01:35
0 2018/02/28 16:06:03
0 2018/02/28 16:06:54
0 2018/02/28 16:07:56
0 2018/02/28 16:08:33
0 2018/02/28 16:09:23
0 2018/02/28 16:10:01
0 2018/02/28 16:11:26
0 2018/03/04 13:18:13
0 2018/03/04 13:18:49
0 2018/03/04 13:19:28
Ok I want my trims working properly. This thing is in default mode! Going through parts of harnesses I've saved and none of these will fit unless I grind a tab off so it locks in. Otherwise it runs pretty stable after fixing all the big vacuum leaks.
Ok I want my trims working properly. This thing is in default mode! Going through parts of harnesses I've saved and none of these will fit unless I grind a tab off so it locks in. Otherwise it runs pretty stable after fixing all the big vacuum leaks.
0 2018/03/04 13:20:03
0 2018/03/10 06:32:35
0 2018/03/10 12:02:11
0 2018/03/16 15:30:43
0 2018/03/16 15:31:52
0 2018/03/31 14:56:23
Still need bump stops. These are Sky Jacker coils. Not sure the lift.. I'm guessing 6" or 6.5"
Still need bump stops. These are Sky Jacker coils. Not sure the lift.. I'm guessing 6" or 6.5"
0 2018/03/31 14:57:55
0 2018/03/31 15:01:19
0 2018/03/31 15:02:06
0 2018/03/31 15:02:39
0 2018/03/31 15:05:23
0 2018/03/31 15:06:58
0 2018/04/01 14:14:37
0 2018/04/01 14:15:36