Jeep Cherokee Forum
Left is probably original. It was shot
Left is probably original. It was shot
0 2021/10/12 03:47:57
0 2021/10/23 05:26:33
0 2018/02/17 14:37:29
0 2021/11/19 07:32:28
I have the AUX cord coming out a hole in the shift boot.
I have the AUX cord coming out a hole in the shift boot.
0 2018/02/17 14:37:46
and an iPod hookup in the center console
and an iPod hookup in the center console
0 2018/02/17 14:38:02
0 2021/12/11 07:08:18
my old school Craftsman carpenters tool box
my old school Craftsman carpenters tool box
0 2018/02/17 14:38:18
0 2022/03/29 05:46:30
0 2022/05/01 09:41:17
I leave the back seat out
I leave the back seat out
0 2018/02/17 14:38:34
0 2022/05/01 09:43:18
0 2022/12/20 05:50:19
0 2023/01/09 00:42:36
0 2023/01/09 00:43:29
I have one of these. I think it is a Craftsman. I cannot personally recommend any other brand as i have never used any of them. It is slow and the keyed chuck sucks. But ive used it where nothing else would fit and it saved my ass a ton of extra work more than once.
I have one of these. I think it is a Craftsman. I cannot personally recommend any other brand as i have never used any of them. It is slow and the keyed chuck sucks. But ive used it where nothing else would fit and it saved my ass a ton of extra work more than once.
0 2023/07/17 16:26:48
0 2024/02/10 15:06:24
passenger side
passenger side
0 2018/03/10 14:52:30
driver side
driver side
0 2018/03/10 14:52:49
driver side was distorted
driver side was distorted
0 2018/03/10 14:53:04
passenger was nothing but rust
passenger was nothing but rust
0 2018/03/10 14:53:22
0 2018/03/10 14:53:41
passenger side stud
passenger side stud
0 2018/03/10 14:53:57
I straightened them out and added 2.75". i figured a 3 inch lift with a bit of sag
I straightened them out and added 2.75". i figured a 3 inch lift with a bit of sag
0 2018/03/10 14:54:14
new bushings and hardware from my master kit sold to me by Tubur
new bushings and hardware from my master kit sold to me by Tubur
0 2018/03/10 14:54:31
grade 10.9 bolt to replace the stud
grade 10.9 bolt to replace the stud
0 2018/03/10 14:54:48
0 2018/04/01 15:33:36
0 2018/04/04 16:12:47
my 98 2 door and my Haro painted with the same color
my 98 2 door and my Haro painted with the same color
0 2018/04/04 16:14:49
0 2018/04/04 16:23:41
0 2018/04/04 16:25:04
0 2018/04/04 16:29:37
0 2018/04/14 07:30:54
0 2018/04/14 07:33:33
0 2018/04/14 07:33:48
0 2018/04/22 08:41:01
0 2018/04/28 12:21:40
A little too tall so it smashed a bit
A little too tall so it smashed a bit
0 2018/04/28 12:21:59
Drag link to pitman arm - I cut this one down about 1/4 inch
Drag link to pitman arm - I cut this one down about 1/4 inch
0 2018/04/28 12:22:18
This end was a bit different it must have been replaced or something in the past. it ballooned out a bit
This end was a bit different it must have been replaced or something in the past. it ballooned out a bit
0 2018/04/28 12:22:34