Jeep Cherokee Forum
0 2017/04/17 11:25:02
0 2017/04/17 11:37:48
0 2017/04/17 11:37:52
0 2017/04/17 11:37:56
0 2017/04/17 11:37:59
0 2017/04/17 11:38:05
0 2017/05/30 10:54:53
0 2017/05/30 10:55:39
0 2017/05/30 10:57:20
This is where the switches ended up
This is where the switches ended up
0 2017/05/30 10:57:30
0 2017/05/30 10:57:39
0 2017/05/30 10:57:50
My dads M416 jeep trailer getting some love
My dads M416 jeep trailer getting some love
0 2017/05/30 10:58:01
0 2017/05/30 10:58:17
0 2017/05/30 11:06:04
0 2017/05/30 11:06:15
0 2017/05/30 11:06:28
0 2017/05/30 11:06:38
0 2017/05/30 11:06:49
0 2017/05/30 11:11:24
0 2017/05/30 11:11:36
0 2017/05/30 11:11:50
0 2017/05/30 11:12:04
0 2017/08/16 18:41:05
0 2017/08/16 18:41:13
0 2017/08/16 18:41:20
0 2017/08/16 18:41:27
0 2017/08/16 18:41:36
0 2017/08/16 18:41:42
0 2017/08/16 18:41:50
0 2017/08/16 18:45:34
0 2026/06/10 07:54:09
first thing was bending the laser cut pieces, used an 8" vice and some betty clamps. This was actually the hardest part of the build.
first thing was bending the laser cut pieces, used an 8" vice and some betty clamps. This was actually the hardest part of the build.
0 2026/06/10 07:54:38
test fit for bumper
test fit for bumper
0 2026/06/10 07:55:15
test for the swing gates, notice they arent hanging quite right. took some finangling to make the gap even along the bottom. BUT then once the tire was added and the jerry can carrier, they sagged with the weight a little. Ended up making them even with the weight added, so they sit a little funny when empty
test for the swing gates, notice they arent hanging quite right. took some finangling to make the gap even along the bottom. BUT then once the tire was added and the jerry can carrier, they sagged with the weight a little. Ended up making them even with the weight added, so they sit a little funny when empty
0 2026/06/10 07:56:49
high lift jack sits on the tire side.
high lift jack sits on the tire side.
0 2026/06/10 07:58:29
0 2026/06/10 07:59:13
assembled
assembled
0 2026/06/10 07:59:55
added a shelf for the coleman stove on the inside of the drivers side. Some trepidation about cooking on the back side of the fuel cans, but we will see...
added a shelf for the coleman stove on the inside of the drivers side. Some trepidation about cooking on the back side of the fuel cans, but we will see...
0 2026/06/10 08:00:15
0 2026/06/10 08:01:24