Jeep Cherokee Forum
0 2016/10/31 06:24:28
0 2016/10/31 06:24:50
0 2016/10/31 06:25:12
0 2016/11/04 05:53:54
0 2016/11/10 11:29:10
0 2016/11/10 11:29:36
0 2016/11/10 11:30:32
0 2016/11/10 11:31:08
Welded in adaptor
Welded in adaptor
0 2016/11/14 06:07:53
bottom view showing the factory slide bracket.
bottom view showing the factory slide bracket.
0 2016/11/14 06:08:16
Finished and painted
Finished and painted
0 2016/11/14 06:08:51
Passenger seat bracket bolted up. 2" offset off center, 1" back from center give or take. Moved away from the transmission tunnel for fit.
Passenger seat bracket bolted up. 2" offset off center, 1" back from center give or take. Moved away from the transmission tunnel for fit.
0 2016/11/14 06:09:13
Folds almost flat. Could be folded flat if you wanted to remove the cross braces the factory seat sits on.
Folds almost flat. Could be folded flat if you wanted to remove the cross braces the factory seat sits on.
0 2016/11/14 06:11:10
Rear view.
Rear view.
0 2016/11/14 06:11:57
Full JKU seat install complete. Approximately 20hrs of work. Welding, drilling, fabrication, paint
Full JKU seat install complete. Approximately 20hrs of work. Welding, drilling, fabrication, paint
0 2016/11/14 06:12:37
0 2016/11/14 06:13:38
0 2016/11/14 06:14:48
0 2016/11/14 06:15:05
0 2016/11/14 06:15:18
bracket and slide bolted together
bracket and slide bolted together
0 2016/11/14 06:16:22
0 2016/11/14 06:17:21
0 2016/11/14 06:17:40
0 2016/11/14 06:17:52
0 2016/11/14 06:18:06
0 2016/11/14 08:47:17
XJ bench on top of JKU bench assembly
XJ bench on top of JKU bench assembly
0 2016/11/14 08:48:14
Mocking up front seats
Mocking up front seats
0 2016/11/14 08:49:05
adapter fabrication
adapter fabrication
0 2016/11/14 08:49:48
finished adapter with factory 1994 slide mechanisms
finished adapter with factory 1994 slide mechanisms
0 2016/11/14 08:50:34
0 2016/11/14 08:55:06
Back seat view
Back seat view
0 2016/11/14 08:59:50
6 half inch grade 8 hardware, with reinforcement plates under the unibody. Cut center section for the seat to sit level and weld lowering plate with angle.
6 half inch grade 8 hardware, with reinforcement plates under the unibody. Cut center section for the seat to sit level and weld lowering plate with angle.
0 2016/11/14 09:00:19
0 2016/11/14 09:01:28
Functioning fold flat feature *almost folds flat.
Functioning fold flat feature *almost folds flat.
0 2016/11/14 09:01:58
Seats completed. Rear headrests removed for visibility.
Seats completed. Rear headrests removed for visibility.
0 2016/11/14 09:02:47
0 2016/11/15 05:47:00
0 2016/11/15 05:47:21
0 2016/11/17 11:46:55
0 2016/11/17 11:47:07
Finished the tuck and fold and fender and quarter trimming.
Finished the tuck and fold and fender and quarter trimming.
0 2016/11/30 07:20:16