Jeep Cherokee Forum
  • LOG IN
  • REGISTER
  • Forums
    • Technical Discussion
      • Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
      • Modified XJ Cherokee Tech
      • MJ Comanche Tech. Stock & Modified.
      • KL Cherokee Tech
      • Modified Grand Cherokee Tech. All ZJ,WJ & WK aftermarket tech goes here
      • Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
      • Fabrication & builders section.
      • Jeep Builds
      • Aftermarket electrical systems
      • Jeep JK Model Discussion
      • Other Vehicles. Other Jeep models & cars and trucks of other makes
      • Technical Write-Up/How To Section
    • General
      • Introductions
      • Cherokee Chat
      • Cherokee of the Month
    • Wheeling Neighborhoods
      • Pacific Northwest
      • Pacific Southwest
      • Northern Rockies
      • Four Corners
      • Midwest
      • South Central
      • Great Lakes
      • Southeast
      • North Atlantic
      • Mid Atlantic
      • International
    • Wheeling Discussion
      • Trail Reports
      • Land Use Forum
    • Buy, Sell, Trade
      • Non-Cherokee Parts
      • Vendor Showcase
      • Vehicles
      • Axles/Tires/Wheels
      • Engines/Tranny/T-Case
      • Suspension/Steering
      • Accessories
      • Part Outs
      • Miscellaneous
      • Wanted
    • CF Announcements & Suggestions
      • Announcements
      • CF Suggestions & Questions
      • Test Section
  • Marketplace
    • Vendor Directory
    • Become a Vendor
    • Member Marketplace
    • Vendor Marketplace
  • New Posts
  • Tools
    • Car Payment Calculator
    • Tire Rim Calculator
    • Vin Decoder
    • Recalls
    • Technical Service Bulletins (TSBs)
    • Members List
    • Live Feed
  • How-Tos
  • Gallery
  • View Dark Mode
    • Please register or login to enable Dark Mode.
  • Log In
  • Register
Jeep Cherokee Forum
    • Threads
      • Advanced
Dark Mode

Please register or login to enable Dark Mode.

Log In

Forgot your Password?

By logging into your account, you agree to our Terms of Use and Privacy Policy, and to the use of cookies as described therein.
or
 
  • Recent
  • Commented
  • Albums
  • My Pictures

My Post Pictures

spartan762
June 11, 2016
 30
 0
Sort:
Default
  • Default
  • Most Recent
15x8, 3.75 bs. I think these wheels sat around in the backyard awhile.  Put a few coats of primer, sanded down and primed again. I should have a finished product Sunday or Monday
15x8, 3.75 bs. I think these wheels sat around in the backyard awhile. Put a few coats of primer, sanded down and primed again. I should have a finished product Sunday or Monday
0 2016/06/11 15:58:09 spartan762
painted wheels, mount & balance
painted wheels, mount & balance
0 2016/06/27 11:46:16 spartan762
At the transfer case, you can see how far the rear drive shaft has moved before lifting.
At the transfer case, you can see how far the rear drive shaft has moved before lifting.
0 2016/12/10 11:24:42 spartan762
At transfer case close up
At transfer case close up
0 2016/12/10 11:29:13 spartan762
0 2016/12/10 11:30:32 spartan762
0 2016/12/10 11:32:00 spartan762
At transfer case
At transfer case
0 2016/12/10 11:34:04 spartan762
At rear
At rear
0 2016/12/10 11:36:26 spartan762
Rear
Rear
0 2016/12/10 11:42:28 spartan762
0 2016/12/10 11:45:16 spartan762
0 2016/12/10 11:47:26 spartan762
0 2016/12/10 11:49:48 spartan762
At this angle the DS spins without any binding
At this angle the DS spins without any binding
0 2016/12/11 17:47:07 spartan762
DS unbolted, pushed back into TC and took what I needed. It gets in a pretty good pinch from here
DS unbolted, pushed back into TC and took what I needed. It gets in a pretty good pinch from here
0 2016/12/11 17:49:18 spartan762
0 2016/12/11 17:51:19 spartan762
TC end after unbolting and adjusting
TC end after unbolting and adjusting
0 2016/12/11 17:53:35 spartan762
Angle is obvious here
Angle is obvious here
0 2016/12/11 17:59:01 spartan762
When connected, the U-joint is centered at 16" inches. Disconnected and spinning freely the U-joint is centered at 13.5" inches
When connected, the U-joint is centered at 16" inches. Disconnected and spinning freely the U-joint is centered at 13.5" inches
0 2016/12/12 16:21:55 spartan762
When connected U-joiny is centered at 16" and when disconnected U-joint is centered at 13.5" spinning freely
When connected U-joiny is centered at 16" and when disconnected U-joint is centered at 13.5" spinning freely
0 2016/12/12 16:43:12 spartan762
0 2016/12/12 16:46:12 spartan762
Scored this G2 open box SYE kit for $180πŸ˜ƒ
Scored this G2 open box SYE kit for $180πŸ˜ƒ
0 2017/03/14 19:16:35 spartan762
😯😣
😯😣
0 2017/03/14 19:18:22 spartan762
Stock front on left,
Stock front ds from a different XJ on right 33.5 was longer but not long enough
Stock front on left, Stock front ds from a different XJ on right 33.5 was longer but not long enough
0 2017/03/14 19:19:58 spartan762
G2 SYE kit, scored for $180
G2 SYE kit, scored for $180
0 2017/03/14 19:45:34 spartan762
Too short😣😒😭
Too short😣😒😭
0 2017/03/14 19:45:43 spartan762
My stock front drive shaft left,
Front stock ds from a different XJ on right measuring 33.5 inches.
My stock front drive shaft left, Front stock ds from a different XJ on right measuring 33.5 inches.
0 2017/03/14 19:46:01 spartan762
0 2017/03/15 20:53:04 spartan762
0 2017/03/15 20:53:11 spartan762
0 2017/03/15 21:55:57 spartan762
0 2017/03/15 21:57:24 spartan762
 

Top
Jeep Cherokee Forum
  • Contact Us
  • FAQ
  • Archive
  • Advertising
  • Cookie Policy
  • Privacy Statement
  • Terms of Service
  • Your Privacy Choices
  • Manage Preferences

© 2026 MH Sub I, LLC dba Internet Brands



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.