Jeep Cherokee Forum
0 2015/11/07 21:14:52
0 2015/11/07 21:14:53
Today I started ripping out the interior to get ready to take out the carpet and start prepping it for bed liner I also used some of this time to try and figure out my engine problems I'm a little stumped because it's acting like it could be multiple things so I'm just going to go ahead and get a new camshaft and crankshaft position sensor and get plugs wires and cap and rotor and a fuel filter and pump and hopefully it's not the pcm but that should cover my basis and they're fairly cheap too
Today I started ripping out the interior to get ready to take out the carpet and start prepping it for bed liner I also used some of this time to try and figure out my engine problems I'm a little stumped because it's acting like it could be multiple things so I'm just going to go ahead and get a new camshaft and crankshaft position sensor and get plugs wires and cap and rotor and a fuel filter and pump and hopefully it's not the pcm but that should cover my basis and they're fairly cheap too
0 2015/11/08 20:09:17
0 2015/11/08 20:10:10
0 2015/11/08 20:11:10
0 2015/11/08 20:12:20
Here's a couple of pictures of the xj I was starting to build for expeditionary rig but decided to just sale her instead
Here's a couple of pictures of the xj I was starting to build for expeditionary rig but decided to just sale her instead
0 2015/11/09 19:00:22
0 2015/11/09 19:00:25
0 2015/11/09 19:00:27
0 2015/11/09 19:00:28
0 2015/11/09 19:00:30
0 2015/11/09 19:00:31
Here's some updated pictures
Here's some updated pictures
0 2016/01/01 05:26:20
0 2016/01/01 05:26:24
0 2016/01/01 05:26:30
0 2016/01/01 05:26:38
0 2016/01/01 05:26:42
0 2016/01/01 05:26:47
0 2016/01/01 05:26:52
0 2016/01/24 06:45:15
0 2016/01/24 06:45:23
Had the truck lifted and drive like crap so
Had the truck lifted and drive like crap so
0 2016/02/01 03:41:50
I dropped her back down and two weeks later
I dropped her back down and two weeks later
0 2016/02/01 03:41:59
I blow out the rearend and twisted driveshaft in two
I blow out the rearend and twisted driveshaft in two
0 2016/02/01 03:42:04
0 2016/02/01 03:42:09
Pinion bearing have out took some chunks out of the spider gear housing
Pinion bearing have out took some chunks out of the spider gear housing
0 2016/02/01 03:42:14
0 2016/02/01 03:42:19
0 2016/02/01 03:42:23
0 2016/02/01 03:42:28
0 2016/02/01 03:42:33
Got the new rearend in yesterday now for a break from working on these vehicles lol getting more parts ordered for the jeep got me a new crank shaft sensor ordered
Got the new rearend in yesterday now for a break from working on these vehicles lol getting more parts ordered for the jeep got me a new crank shaft sensor ordered
0 2016/02/01 03:42:40
Man this stuff got here quick I got me two buckets of the insulation I'm waiting on the sound deadener now going to coat the roof with the insulation as well and just the floor with the deadener
Man this stuff got here quick I got me two buckets of the insulation I'm waiting on the sound deadener now going to coat the roof with the insulation as well and just the floor with the deadener
0 2016/02/19 16:16:39
About to start the morning off right cup of joe and some jeep work
About to start the morning off right cup of joe and some jeep work
0 2016/02/20 16:55:40
Dropped the tank and this is the state of the old fuel looks like I'll have some parts cleaner
Dropped the tank and this is the state of the old fuel looks like I'll have some parts cleaner
0 2016/02/20 16:55:45
Last time it was registered so I'm guessing it's been sitting up since then
Last time it was registered so I'm guessing it's been sitting up since then
0 2016/02/20 16:55:50
USA made on right China made on left wires are night and day the American part gauge wire is twice the size we shall run the China stuff and see how she holds up the U.S pump has been in since 2012
USA made on right China made on left wires are night and day the American part gauge wire is twice the size we shall run the China stuff and see how she holds up the U.S pump has been in since 2012
0 2016/02/20 16:55:55
Closer picture of the two
Closer picture of the two
0 2016/02/20 16:56:00
Pulled the plugs
Pulled the plugs
0 2016/02/20 16:56:06
0 2016/02/20 16:56:14
Figured while I had the interior out of do it right and replace my evaporator and heater core out
Figured while I had the interior out of do it right and replace my evaporator and heater core out
0 2016/02/20 16:56:19