Jeep Cherokee Forum
0 2015/09/15 19:07:04
0 2015/09/15 19:06:58
0 2015/09/15 19:06:48
0 2015/09/15 19:06:42
Heading up North to Deer River, MN for a week of vacation - also testing out my RV/Jeep Camper
Heading up North to Deer River, MN for a week of vacation - also testing out my RV/Jeep Camper
0 2015/09/15 19:05:55
This is going to remain a stock XJ for the time being. My folks are using this for the time being
This is going to remain a stock XJ for the time being. My folks are using this for the time being
0 2015/09/15 19:03:26
Pulled my stock 96 XJ out for a "family" shot
Pulled my stock 96 XJ out for a "family" shot
0 2015/09/15 19:03:20
Pulled my stock 96 xj out for a "family" shot
Pulled my stock 96 xj out for a "family" shot
0 2015/09/15 19:02:22
0 2015/09/15 19:01:56
0 2015/09/15 19:01:21
mounted light passes through with little disruption
mounted light passes through with little disruption
0 2015/09/15 19:01:16
painted flat black
painted flat black
0 2015/09/15 19:00:08
Steel mesh trimmed and mounted
Steel mesh trimmed and mounted
0 2015/09/15 19:00:01
modified the headlight bezels to add some trail protection
modified the headlight bezels to add some trail protection
0 2015/09/15 18:59:53
I wanted a way to watch some movies while out camping - figured this was the best place to mount it since it was where the spare tire mounted
I wanted a way to watch some movies while out camping - figured this was the best place to mount it since it was where the spare tire mounted
0 2015/09/15 18:57:52
Installed a swing out flat panel screen mount
Installed a swing out flat panel screen mount
0 2015/09/15 18:57:44
Second battery installed - just have a standard lead-acid battery for now, but I plan on getting an Optima yellow top battery
Second battery installed - just have a standard lead-acid battery for now, but I plan on getting an Optima yellow top battery
0 2015/09/15 18:45:38
Installed the same fuse block(200A ANL fuse) I used on the inverter to keep the isolator from getting shocked
Installed the same fuse block(200A ANL fuse) I used on the inverter to keep the isolator from getting shocked
0 2015/09/15 18:45:33
0 2015/09/15 18:45:30
Ran new 4GA battery cable from alternator to isolator Also from battery 1 post to main battery and a cable from battery 2 post to second battery
Ran new 4GA battery cable from alternator to isolator Also from battery 1 post to main battery and a cable from battery 2 post to second battery
0 2015/09/15 18:45:22
Before I installed my second battery I needed to install a battery isolator to prevent my second battery from draining my main battery down -- I installed a 200A battery isolator
Before I installed my second battery I needed to install a battery isolator to prevent my second battery from draining my main battery down -- I installed a 200A battery isolator
0 2015/09/15 18:43:31
Installed in the rear quarter drivers side cavity
Installed in the rear quarter drivers side cavity
0 2015/09/15 18:41:42
Added some outlets front and rear to go along with the power inverter
Added some outlets front and rear to go along with the power inverter
0 2015/09/15 18:41:27
STICKERS!!! Baa Baa Black Jeep
STICKERS!!! Baa Baa Black Jeep
0 2015/09/15 18:40:33
0 2015/09/15 18:40:01
0 2015/09/15 18:39:54
0 2015/09/15 18:39:46
Needed to remove some CANCER from the jeep There wasn't enough good metal remaining to do a decent cut-n-fold on the rear quarter. So I opted to cut the quarter off at the body line
Needed to remove some CANCER from the jeep There wasn't enough good metal remaining to do a decent cut-n-fold on the rear quarter. So I opted to cut the quarter off at the body line
0 2015/09/15 18:38:31
Rear shocks installed
Rear shocks installed
0 2015/09/15 18:37:55
Installed the rear shocks today. Used the rear sway bar end link mounts as FREE bar pin eliminators. Did I mention they were FREE?
Installed the rear shocks today. Used the rear sway bar end link mounts as FREE bar pin eliminators. Did I mention they were FREE?
0 2015/09/15 18:36:49
Everything put back together and no extra parts! BONUS!
Everything put back together and no extra parts! BONUS!
0 2015/09/15 18:34:51
New joint installed
New joint installed
0 2015/09/15 18:34:43
The joints came apart easier than I expected
The joints came apart easier than I expected
0 2015/09/15 18:34:35
Stock axle shaft removed
Stock axle shaft removed
0 2015/09/15 18:31:49
0 2015/09/15 18:31:40
Hub assembly came off relatively easy considering I have never has it off
Hub assembly came off relatively easy considering I have never has it off
0 2015/09/15 18:31:31
So the disassemble begins
So the disassemble begins
0 2015/09/15 18:31:24
Found out it was coming from the axle u joint
Found out it was coming from the axle u joint
0 2015/09/15 18:31:20
Kept hearing a clicking noise coming from the passenger side
Kept hearing a clicking noise coming from the passenger side
0 2015/09/15 18:31:03
Thought I should protect my power inverter with a fuse -- 200A ANL fuse
Thought I should protect my power inverter with a fuse -- 200A ANL fuse
0 2015/09/15 18:29:36