Jeep Cherokee Forum
I'll just leave this here. That's out of my 01
I'll just leave this here. That's out of my 01
0 2015/07/25 03:50:10
You need to check your water pump. I started running up in the 215ish area, no noise, no leaks until my radiator decided to give out from old age and I overhauled the entire system. This is what I found on my 01 when I pulled the water pump
You need to check your water pump. I started running up in the 215ish area, no noise, no leaks until my radiator decided to give out from old age and I overhauled the entire system. This is what I found on my 01 when I pulled the water pump
0 2015/07/25 04:53:16
X3 on the hyline offroad louvers
X3 on the hyline offroad louvers
0 2015/07/25 05:16:39
Best part, you get a template. No guess work on drilling and cutting
Best part, you get a template. No guess work on drilling and cutting
0 2015/07/25 05:17:20
0 2015/07/25 05:23:41
Initial fitting
Initial fitting
0 2015/07/25 06:49:46
After hand filing to fit switches
After hand filing to fit switches
0 2015/07/25 06:49:47
Primer, 3 coats
Primer, 3 coats
0 2015/07/25 06:49:48
Ultra flat black, 4 coats
Ultra flat black, 4 coats
0 2015/07/25 06:49:49
Clear coat finish, 6 coats
Clear coat finish, 6 coats
0 2015/07/25 06:49:49
Mark up before switches
Mark up before switches
0 2015/07/25 06:49:50
0 2015/07/25 06:49:51
Adding my wiring harness to the mess. Used connectors from random junk yard cars to add my switch harness without making it permanent
Adding my wiring harness to the mess. Used connectors from random junk yard cars to add my switch harness without making it permanent
0 2015/07/25 06:49:52
Ignition on the bottom lights up
Ignition on the bottom lights up
0 2015/07/25 06:49:53
Switch on the top part lights up
Switch on the top part lights up
0 2015/07/25 06:49:53
Bench top test of the harness. One connector goes to my radio harness, the other goes to the engine bay
Bench top test of the harness. One connector goes to my radio harness, the other goes to the engine bay
0 2015/07/25 06:55:12
0 2015/07/26 04:41:55
0 2015/07/26 04:41:57
0 2015/07/26 04:55:24
0 2015/07/26 20:19:26
Start of the relay cluster
Start of the relay cluster
0 2015/07/29 06:06:24
0 2015/07/29 06:06:26
0 2015/07/29 06:06:27
Adding the connectors
Adding the connectors
0 2015/07/29 06:06:28
0 2015/07/29 06:06:29
0 2015/07/29 06:06:30
Soldering in the connector to the wires coming from the engine bay
Soldering in the connector to the wires coming from the engine bay
0 2015/07/29 06:06:31
0 2015/07/29 06:06:32
Battery connections. Choice to do a direct ground to the battery body ground point as well as a body ground by the relay cluster
Battery connections. Choice to do a direct ground to the battery body ground point as well as a body ground by the relay cluster
0 2015/07/29 06:06:34
0 2015/07/29 06:06:35
0 2015/07/29 06:06:36
Couldn't figure out how to mark what was what because i used the same type of connector harvested from junk yard vehicles so i did color coded shrink wrap
Couldn't figure out how to mark what was what because i used the same type of connector harvested from junk yard vehicles so i did color coded shrink wrap
0 2015/07/29 06:06:37
0 2015/07/29 06:06:38
0 2015/07/29 06:06:39
0 2015/08/17 18:43:47