Jeep Cherokee Forum
0 2016/02/28 23:41:33
And this came with the bracket but I couldn't use it in this shape so I bent it with pliers
And this came with the bracket but I couldn't use it in this shape so I bent it with pliers
0 2015/09/27 22:05:05
This is the bracket, I see a lot of people install them over the taillight but I wanted a 4th antenna with a cleaner install and there's lot of room under the driver taillight
This is the bracket, I see a lot of people install them over the taillight but I wanted a 4th antenna with a cleaner install and there's lot of room under the driver taillight
0 2015/09/27 22:02:13
Badwater Basin
Badwater Basin
0 2016/02/28 23:36:42
0 2015/08/02 17:53:54
I took this after the Yakima bars were added but while it still had the steel original wheels.
I took this after the Yakima bars were added but while it still had the steel original wheels.
0 2015/08/01 20:14:30
0 2016/02/28 23:35:43
This was taken right after I got it, even before it had any roof rack
This was taken right after I got it, even before it had any roof rack
0 2015/08/01 20:13:32
Factory with worn 31" tires & 1.5" blocks & extended shackles in, the rest will have to wait.
Factory with worn 31" tires & 1.5" blocks & extended shackles in, the rest will have to wait.
0 2016/02/27 16:59:20
0 2016/02/27 17:02:41
The Cherokee with Grizzly wheels from a late 90's Wrangler.
The Cherokee with Grizzly wheels from a late 90's Wrangler.
0 2015/06/14 22:52:42
States "VOLUNTARY" at 1:20 in the video
States "VOLUNTARY" at 1:20 in the video
0 2015/08/02 17:52:34
0 2016/02/26 18:47:30
This is a pic about 2 months ago after the Grizzly's were installed... they orignally came on some 90's Wrangler if anyone is interested... and they have the same backspacing as the steel wheels.
This is a pic about 2 months ago after the Grizzly's were installed... they orignally came on some 90's Wrangler if anyone is interested... and they have the same backspacing as the steel wheels.
0 2015/08/01 20:18:46
0 2016/02/26 18:24:13
0 2016/02/29 13:24:52
0 2016/02/29 13:25:25
0 2016/02/27 17:02:15
0 2015/11/07 15:58:36
0 2016/02/27 16:59:46
0 2015/11/07 15:58:19
Yikes, $7500? For a 2wd??
Yikes, $7500? For a 2wd??
0 2015/10/16 08:31:25
And so this is the kit I used. I think it cost about $4 from Harbor Freight. The rods about about 12" and pretty flexible... the small transparent rod is an end-piece and super flexible but I only used the hook end.
And so this is the kit I used. I think it cost about $4 from Harbor Freight. The rods about about 12" and pretty flexible... the small transparent rod is an end-piece and super flexible but I only used the hook end.
0 2015/09/27 23:45:01
And then up to the dashboard where you can route it wherever you want to and you can just push it under the edges of the trim where needed so it's completely concealed and clean.
And then up to the dashboard where you can route it wherever you want to and you can just push it under the edges of the trim where needed so it's completely concealed and clean.
0 2015/09/27 23:42:46
It took me about 45 minutes to fish through because I was being careful and hadn't done it before but could probably be done in under 30 minutes easy.
It took me about 45 minutes to fish through because I was being careful and hadn't done it before but could probably be done in under 30 minutes easy.
0 2015/09/27 23:41:01
And since it comes in 1' sections you just add and remove as necessary. This is up in the driver floorboard with the two front screws removed instead of having to remove all the trim along the driver side.
And since it comes in 1' sections you just add and remove as necessary. This is up in the driver floorboard with the two front screws removed instead of having to remove all the trim along the driver side.
0 2015/09/27 23:39:00
Which is what happened to me so I added a little rubber band insurance.
Which is what happened to me so I added a little rubber band insurance.
0 2015/09/27 23:37:39
But don't try to pull the wire through with it sliding through the hook because it's hard on the wire and it will get stuck.... give it enough slack to make it all the way to the destination and it's pretty easy. But if you back the hook up the wire will probably come off and you can't get it hooked again.
But don't try to pull the wire through with it sliding through the hook because it's hard on the wire and it will get stuck.... give it enough slack to make it all the way to the destination and it's pretty easy. But if you back the hook up the wire will probably come off and you can't get it hooked again.
0 2015/09/27 23:34:48
0 2015/09/27 23:33:48
0 2015/09/27 23:32:48
0 2015/09/27 23:31:35
And now I have the rear inside trim off and am fishing it through with a kit I got from Harbor Freight for a couple bucks (well worth it the price!). This kit has 1ft pieces of flexible fiberglass rod that you can put together to fish electrical line through passages. It comes with a hook and a small super flexible end piece but I just needed the hook to do this.
And now I have the rear inside trim off and am fishing it through with a kit I got from Harbor Freight for a couple bucks (well worth it the price!). This kit has 1ft pieces of flexible fiberglass rod that you can put together to fish electrical line through passages. It comes with a hook and a small super flexible end piece but I just needed the hook to do this.
0 2015/09/27 23:27:44
And here it is all together with the lift gate up.
And here it is all together with the lift gate up.
0 2015/09/27 23:26:23
0 2015/09/27 23:25:09
So this is my finished install for the antenna.
So this is my finished install for the antenna.
0 2015/09/27 23:23:32
It's pretty easy to get a wrench in with the lift gate up and a socket & extension is also pretty easy to get on underneath to tight it down.
It's pretty easy to get a wrench in with the lift gate up and a socket & extension is also pretty easy to get on underneath to tight it down.
0 2015/09/27 23:21:00
And then after I put the trim on I was able to assemble it all.
And then after I put the trim on I was able to assemble it all.
0 2015/09/27 23:18:27
So I put the trim back on and marked the center
So I put the trim back on and marked the center
0 2015/09/27 23:16:07
0 2015/09/27 22:15:48
So I rigged it on a guitar stand
So I rigged it on a guitar stand
0 2015/09/27 22:14:37