Jeep Cherokee Forum
Shackle box cut out and ground down. Had to cut it in a bunch of pieces as the leaf spring kept getting in the way
Shackle box cut out and ground down. Had to cut it in a bunch of pieces as the leaf spring kept getting in the way
0 2017/08/08 17:17:53
Hit it with the wire wheel to clean it up
Hit it with the wire wheel to clean it up
0 2017/08/08 17:19:51
Mock up for clearance and for the upper bolts to be drilled. The 2 nuts that hold the bumper on get in the way so I had to grind down part of the bracket so it sits nicely.
Mock up for clearance and for the upper bolts to be drilled. The 2 nuts that hold the bumper on get in the way so I had to grind down part of the bracket so it sits nicely.
0 2017/08/08 17:20:51
Also prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put the "bushing" in. Have one on the way right now. Yes it's color matched be quiet.
Also prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put the "bushing" in. Have one on the way right now. Yes it's color matched be quiet.
0 2017/08/08 17:23:30
Also started prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put in the "bushing". Have one on the wat right now. Yes it's color matched be quiet.
Also started prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put in the "bushing". Have one on the wat right now. Yes it's color matched be quiet.
0 2017/08/08 17:26:18
threw some paint on it. Had some trouble drilling the upper holes because the leaf spring wouldn't let me drill up for one of them. So there's a bigger hole now.
threw some paint on it. Had some trouble drilling the upper holes because the leaf spring wouldn't let me drill up for one of them. So there's a bigger hole now.
0 2017/08/08 17:28:28
Also started prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put in the "bushing". I have one on the way right now
Also started prepping the Boostwerks shackles. Completely forgot about the spanner wrench they use and couldn't unscrew the plate to put in the "bushing". I have one on the way right now
0 2017/08/08 17:31:14
0 2017/08/08 17:34:21
Underneath the fuel hose is the bad rust I need to cut out and get new metal in.
Underneath the fuel hose is the bad rust I need to cut out and get new metal in.
0 2017/08/09 21:34:24
Scratched the paint :(
Scratched the paint :(
0 2017/08/09 21:35:32
Pretty sure if I move back a hole I can get alittle more lift
Pretty sure if I move back a hole I can get alittle more lift
0 2017/08/15 18:47:16
Yes that's the driveshaft on the ground. I may or may not have tried to test drive without it.
Yes that's the driveshaft on the ground. I may or may not have tried to test drive without it.
0 2017/08/15 18:48:36
Rushed painting in winter when I got the bumper and left the inside just primered and it started to rust. Sanded it down and layed a few coats of Krylon* rust enamel
Rushed painting in winter when I got the bumper and left the inside just primered and it started to rust. Sanded it down and layed a few coats of Krylon* rust enamel
0 2017/08/15 18:49:36
AresFab plug
AresFab plug
0 2017/08/15 18:51:22
0 2017/08/15 18:54:22
0 2017/08/19 21:35:16
0 2017/08/19 21:35:38
0 2017/08/23 12:53:01
0 2017/08/23 12:53:38
almost new 35x12.50x15 TSL Super Swamper, too bad the DOT is from 2000
almost new 35x12.50x15 TSL Super Swamper, too bad the DOT is from 2000
0 2017/08/23 12:54:42
Said Bronco was on 9" of lift. They plan on lowering it down to 4" with the 305/65/17s we put on.
Said Bronco was on 9" of lift. They plan on lowering it down to 4" with the 305/65/17s we put on.
0 2017/08/23 12:55:43
Almost new 35x12.50x15 TSL Super Swamper. Unfortunately with a DOT from 2000
Almost new 35x12.50x15 TSL Super Swamper. Unfortunately with a DOT from 2000
0 2017/08/23 13:09:22
0 2017/08/25 18:30:58
0 2017/08/25 18:31:56
0 2017/09/14 18:51:14
Fixed RE 3.5" LCA
Fixed RE 3.5" LCA
0 2017/09/16 19:12:02
Cavfab adjustable LCA
Cavfab adjustable LCA
0 2017/09/16 19:12:39
0 2017/09/20 14:55:01
0 2017/09/20 18:50:32
Only pic I got. Too busy throwing things in anger at that bushing
Only pic I got. Too busy throwing things in anger at that bushing
0 2017/09/23 21:02:05
0 2017/09/24 17:49:15
0 2017/09/24 17:50:12
0 2017/09/24 17:51:21
0 2017/09/25 21:41:38
I never realized how big mine is compared to another XJ
I never realized how big mine is compared to another XJ
1 2017/10/02 19:47:42
0 2017/10/16 18:50:36
Met up with my coworker
Met up with my coworker
0 2017/10/23 10:01:06
Jeep had highway issues, i had to stay in OD 3250rpms the whole time to be at just 65mph. Used up half a tank. The temp gauge never went past 215, but i saw smoke and pulled over to see oil pissing out the rear main and my overflow tank boiling coolant. Let it sit to cool off and was fine. Didn't act like this on the way back either, steady 2250 rpms at 65 all the way, barely used a quarter tank.
Jeep had highway issues, i had to stay in OD 3250rpms the whole time to be at just 65mph. Used up half a tank. The temp gauge never went past 215, but i saw smoke and pulled over to see oil pissing out the rear main and my overflow tank boiling coolant. Let it sit to cool off and was fine. Didn't act like this on the way back either, steady 2250 rpms at 65 all the way, barely used a quarter tank.
0 2017/10/23 10:01:56
Brandon
Brandon
0 2017/10/23 10:06:19
Bub's freshly chopped XJ
Bub's freshly chopped XJ
0 2017/10/23 10:07:02