Jeep Cherokee Forum
0 2015/01/05 00:42:06
0 2015/01/05 00:43:47
0 2015/01/05 00:55:07
0 2015/04/09 03:02:19
0 2015/04/09 06:51:15
0 2015/04/09 06:56:05
0 2015/04/09 06:58:44
0 2015/04/09 07:00:16
0 2015/06/21 18:16:58
0 2015/06/21 18:21:06
0 2015/06/25 07:08:24
0 2015/06/25 08:12:56
0 2015/06/26 05:44:21
About to cut out the wheel arches
About to cut out the wheel arches
0 2015/06/28 03:35:43
0 2015/06/28 03:43:40
0 2015/06/28 18:34:17
0 2015/06/28 18:34:37
Covering the tires is important to keep the fun police off my back in our state
Covering the tires is important to keep the fun police off my back in our state
0 2015/06/28 18:36:46
I'm building my "Dream CJ6 ” and the next build I'll be using a spare script body on my own fabricated frame
I'm building my "Dream CJ6 ” and the next build I'll be using a spare script body on my own fabricated frame
1 2015/07/01 20:36:30
0 2015/07/09 06:47:03
0 2015/07/09 07:18:05
0 2015/07/09 07:25:35
0 2015/07/09 07:29:13
0 2015/07/09 07:33:28
0 2015/07/09 07:34:16
0 2015/07/09 07:35:10
0 2015/07/10 17:08:24
0 2015/07/10 17:09:32
0 2015/07/10 17:24:34
I've cut the flange off the top offcut and flipped it, welded to the bottom flange to increase strength them spaced it 1/4" off the original cover for clearance
I've cut the flange off the top offcut and flipped it, welded to the bottom flange to increase strength them spaced it 1/4" off the original cover for clearance
0 2015/07/10 17:56:23
0 2015/07/14 01:20:49
I still haven't got pic's after fitting it back on with new lower recessed winch cradle As I've said before on another thread it's made of 1/4" flat and only cost me $100 for the Steel
I still haven't got pic's after fitting it back on with new lower recessed winch cradle As I've said before on another thread it's made of 1/4" flat and only cost me $100 for the Steel
0 2015/07/17 02:46:34
0 2015/07/18 03:20:33
0 2015/07/18 03:21:28
0 2015/07/18 06:34:17
0 2015/08/03 16:07:23