Jeep Cherokee Forum
Fun day playing around on some easy stuff at Gordy's Hill, NM
Fun day playing around on some easy stuff at Gordy's Hill, NM
0 2014/12/15 08:19:03
Too much snow on this thread, lately!
Too much snow on this thread, lately!
0 2015/01/12 06:58:47
You can see the cage installed.
You can see the cage installed.
0 2015/01/14 21:36:02
Before
Before
0 2015/01/14 21:36:09
Before
Before
0 2015/01/14 21:36:16
Replacement carpet out of an '88 at the JY
Replacement carpet out of an '88 at the JY
0 2015/01/14 21:36:21
Cockpit piece
Cockpit piece
0 2015/01/14 21:36:27
Trunk Piec
Trunk Piec
0 2015/01/14 21:36:32
Layer of FatMat RattleTrap 80mm throughout
Layer of FatMat RattleTrap 80mm throughout
0 2015/01/14 21:36:39
0 2015/01/14 21:36:44
Heat shielding going in on the Transmission Tunnel
Heat shielding going in on the Transmission Tunnel
0 2015/01/14 21:36:53
0 2015/01/14 21:37:00
0 2015/01/14 21:37:13
0 2015/01/14 21:37:21
0 2015/01/14 21:37:29
0 2015/01/14 21:37:34
0 2015/01/14 21:37:47
Sizing everything up
Sizing everything up
0 2015/01/14 21:51:47
0 2015/01/14 21:51:53
Going to use the tie downs to secure in the back
Going to use the tie downs to secure in the back
0 2015/01/14 21:51:59
0 2015/01/14 21:52:05
Rough in with the deck on.
Rough in with the deck on.
0 2015/01/14 21:52:11
Lined up well with the latch
Lined up well with the latch
0 2015/01/14 21:52:17
1x6 with 23x32's ply on top
1x6 with 23x32's ply on top
0 2015/01/14 21:52:25
Ran the sides all the to the passenger seat, hoping to hit the rear tie downs, but no go. Ended up through bolting through the wheel wells.
Ran the sides all the to the passenger seat, hoping to hit the rear tie downs, but no go. Ended up through bolting through the wheel wells.
0 2015/01/14 21:52:33
Bottom support for the drawers. Didn't want to try screwing into the sidewall of the plywood
Bottom support for the drawers. Didn't want to try screwing into the sidewall of the plywood
0 2015/01/14 21:52:39
0 2015/01/14 21:52:45
0 2015/01/14 21:52:51
Added some wings to cover the spots behind the wheel wells so the dog wouldn't fall in. Hinges mean easy access.
Added some wings to cover the spots behind the wheel wells so the dog wouldn't fall in. Hinges mean easy access.
0 2015/01/14 21:52:55
0 2015/01/14 21:52:59
Added some wings to cover the spots behind the wheel wells so the dog wouldn't fall in. Hinges mean easy access.
Added some wings to cover the spots behind the wheel wells so the dog wouldn't fall in. Hinges mean easy access.
0 2015/01/14 21:53:04
Heavy duty drawer sliders from Lowes, and fender washers through bolted on the rear tie downs.
Heavy duty drawer sliders from Lowes, and fender washers through bolted on the rear tie downs.
0 2015/01/14 21:53:21
A roll of automotive carpet from Autozone covers the deck. I also added some sheeting between the rear seat and the C-pillar on the cage. The drawers don't extend that far, so I have more storage for things that don't get used that much (jack, chocks, etc). Only accessible by pulling the seat back forward.
A roll of automotive carpet from Autozone covers the deck. I also added some sheeting between the rear seat and the C-pillar on the cage. The drawers don't extend that far, so I have more storage for things that don't get used that much (jack, chocks, etc). Only accessible by pulling the seat back forward.
0 2015/01/14 21:53:34
Finished product.
Finished product.
0 2015/01/14 21:53:41
0 2015/02/20 13:00:09
0 2015/02/20 13:00:15
0 2015/02/20 13:00:27
0 2015/02/20 13:00:37
0 2015/02/20 13:00:42
0 2015/02/20 13:00:46