Jeep Cherokee Forum
1993 Jeep Cherokee 4.0 liter 4x4
1993 Jeep Cherokee 4.0 liter 4x4
2 2011/08/05 10:37:35
First picture of her before she was mine. guy wanted 1900 i talked him down to 1400!! :)
First picture of her before she was mine. guy wanted 1900 i talked him down to 1400!! :)
0 2011/11/20 19:54:00
Before the 31s. The right rear had a spare on it that blew out after a few drives.
Before the 31s. The right rear had a spare on it that blew out after a few drives.
0 2011/11/20 19:54:00
The Two used 31s i bought at a tire shop used 55 bucks a pop!!! good deal considering shes just an off road toy!!
The Two used 31s i bought at a tire shop used 55 bucks a pop!!! good deal considering shes just an off road toy!!
0 2011/11/20 19:54:00
Painted the stock plastic grill as well as the plastic piecesd around the headlights with some satin black spray paint from ace! much improved from how faded it was before!
Painted the stock plastic grill as well as the plastic piecesd around the headlights with some satin black spray paint from ace! much improved from how faded it was before!
0 2011/11/20 19:54:00
got one of my new 31s on the stock rim (mounted it on the rim at home without the use of any machine) the trick is use lots of dish soap :-)
got one of my new 31s on the stock rim (mounted it on the rim at home without the use of any machine) the trick is use lots of dish soap :-)
0 2011/11/20 19:54:00
My Jeep as of Thanksgiving 2011, about to trim and roll the fenders. just need two more 31s the lift kits will follow sometime soon!!!! cant wait!
My Jeep as of Thanksgiving 2011, about to trim and roll the fenders. just need two more 31s the lift kits will follow sometime soon!!!! cant wait!
0 2011/11/24 09:28:07
installing my Hella lights!!! just gotta hook them up now...
installing my Hella lights!!! just gotta hook them up now...
2 2012/01/02 07:08:22
new hella lights before i rolled the front fender, and buffed the paint.
new hella lights before i rolled the front fender, and buffed the paint.
0 2012/01/16 06:43:21
i cut the corners this way on the front so the curve would stay the same
i cut the corners this way on the front so the curve would stay the same
0 2012/01/16 06:50:02
here is the inside you may be able to see but when i bent the tabs in i made sure that they pinched the inner rubber to hold it in place.
here is the inside you may be able to see but when i bent the tabs in i made sure that they pinched the inner rubber to hold it in place.
0 2012/01/16 06:50:02
after bending them in, ill probably paint about and inch of the lip with some flat black paint or bedliner.
after bending them in, ill probably paint about and inch of the lip with some flat black paint or bedliner.
0 2012/01/16 06:50:02
4.5 inch RC full rear leafs,'95 chevy 1500 shackles, RC Rear N 2.0 shocks, 4.5 inch front coils, 1 3/4" coil spacer, Rubicon Express Twin Tube Front shocks. RC adj. UCA's/LCA's, adj. RC track bar with drop bracket. Sets her right at 6" of lift, just waiting for my new wheels to get powdercoated, then wrapping them in 33/1050's.
4.5 inch RC full rear leafs,'95 chevy 1500 shackles, RC Rear N 2.0 shocks, 4.5 inch front coils, 1 3/4" coil spacer, Rubicon Express Twin Tube Front shocks. RC adj. UCA's/LCA's, adj. RC track bar with drop bracket. Sets her right at 6" of lift, just waiting for my new wheels to get powdercoated, then wrapping them in 33/1050's.
0 2012/03/05 07:10:46
first time pulling it out of the garage after the lift, just gotta find some tires for my other rims. along with sye/cv DS.
first time pulling it out of the garage after the lift, just gotta find some tires for my other rims. along with sye/cv DS.
0 2012/03/12 08:05:56
1/2" spacer from ace hardware aka "T Case drop kit". i got two 1" spacer but then had to stack 2 half inch ones because they ran out of 1 inch :-(
1/2" spacer from ace hardware aka "T Case drop kit". i got two 1" spacer but then had to stack 2 half inch ones because they ran out of 1 inch :-(
0 2012/03/13 21:28:22
Installed t case drop, just had to make a jam nut to remove the stuf on each side holding the cross member, then use new longer bolts.
Installed t case drop, just had to make a jam nut to remove the stuf on each side holding the cross member, then use new longer bolts.
0 2012/03/13 21:28:22
Most of lift installed sitting just over 6 inches of lift, of course getting new tires this week with an offset wheel. just debating powder coating the wheels or not... 33 1250 btw
Most of lift installed sitting just over 6 inches of lift, of course getting new tires this week with an offset wheel. just debating powder coating the wheels or not... 33 1250 btw
0 2012/03/13 21:28:22
inside of front drivers side wheel well
inside of front drivers side wheel well
0 2012/03/13 21:28:22
Got the new(used) wheels on with new 33/1250/15 goodyear wrangler duratracs. SYE kit next followed by new CV Driveshaft from Adams Driveshaft in Nevada!!!
Got the new(used) wheels on with new 33/1250/15 goodyear wrangler duratracs. SYE kit next followed by new CV Driveshaft from Adams Driveshaft in Nevada!!!
0 2012/03/20 21:58:33
Got my Rugged Ridge SYE mounted on my NP231.
Got my Rugged Ridge SYE mounted on my NP231.
0 2012/03/20 21:58:33
Buffed the whole jeep, just befroe putting the New Rear Driveline on. also peeled off the old black lining around that windows revealing a nice chrome layer.
Buffed the whole jeep, just befroe putting the New Rear Driveline on. also peeled off the old black lining around that windows revealing a nice chrome layer.
0 2012/03/20 22:05:53
CV Driveshaft from Adams Driveshaft, very pleased with how beefy it was! Looks liks an awesome DS, $400 bucks even btw for the SYE kit, and the Driveshaft! and its not a rebuild.
CV Driveshaft from Adams Driveshaft, very pleased with how beefy it was! Looks liks an awesome DS, $400 bucks even btw for the SYE kit, and the Driveshaft! and its not a rebuild.
0 2012/03/20 22:14:12
image 332754305
image 332754305
0 2013/01/31 11:20:20