Lift those rear shocks. Parental Warning, some photo's may contain blocks

October 15, 2011

11

0

Clean for welding, mark 1/2 way up, cut with zip disc.

Clean for welding, mark 1/2 way up, cut with zip disc.

0 2011/10/15 16:07:02 peep

Trim back 1/2 to 5/8 inch

Trim back 1/2 to 5/8 inch

0 2011/10/15 16:07:02 peep

Check your fit and sand bevel on edge to assist weld penatration

Check your fit and sand bevel on edge to assist weld penatration

0 2011/10/15 16:07:02 peep

0 2011/10/15 16:07:02 peep

Weld complete, even a little inside at top as torch will fit

Weld complete, even a little inside at top as torch will fit

0 2011/10/15 16:07:02 peep

Shoot it with rust paint

Shoot it with rust paint

0 2011/10/15 16:22:33 peep

That Monroe Sensitrac with Load Assist spring fits like a glove

That Monroe Sensitrac with Load Assist spring fits like a glove

0 2011/10/15 16:22:33 peep

Nice extra clear under the axle

Nice extra clear under the axle

0 2011/10/15 16:22:33 peep

Ive seen some bring it right up onto the axle, remember there is a lip seal inside the housing, watch the heat.

Ive seen some bring it right up onto the axle, remember there is a lip seal inside the housing, watch the heat.

0 2011/10/15 16:22:33 peep

Sensatrac Standard and Load Assist Type, plus 80000 miles, 7" stroke (13 - 20 inch)

Sensatrac Standard and Load Assist Type, plus 80000 miles, 7" stroke (13 - 20 inch)

0 2012/03/18 17:30:02 peep

1 inch Stainless Spacers plus M8-1.25 x 45mm When running blocks this completes the shock back to normal operating position and range.

1 inch Stainless Spacers plus M8-1.25 x 45mm When running blocks this completes the shock back to normal operating position and range.

0 2012/03/18 17:30:02 peep