Jeep Cherokee Forum
Small wire bracket just inside door maintains wire position, many years this way, no problems
Small wire bracket just inside door maintains wire position, many years this way, no problems
0 2014/12/14 08:22:24
Wire feeds, twin 12ga, fed thru door seal
Wire feeds, twin 12ga, fed thru door seal
0 2014/12/14 08:21:16
Holding up well, scortched earth when lit, I actually aimed them to work area 50-60 ft out front, when actual application in service/rescue occurs
Holding up well, scortched earth when lit, I actually aimed them to work area 50-60 ft out front, when actual application in service/rescue occurs
0 2014/12/14 08:19:35
Rear wired, double feeds from twin 30 amp relays, fed thru twin 20 amp fuses from battery.
Rear wired, double feeds from twin 30 amp relays, fed thru twin 20 amp fuses from battery.
0 2014/12/14 08:18:15
Passenger side, all wire connectors crimped and soldered
Passenger side, all wire connectors crimped and soldered
0 2014/12/14 08:17:34
Limb Lift Bar
Limb Lift Bar
0 2014/12/14 08:17:08
Front View
Front View
0 2014/12/14 08:16:42
2014 SilStarLiteBar
2014 SilStarLiteBar
0 2014/12/14 08:16:01
5 Silverstars on a Stainless frame, fanned pattern, stainless fasteners to roof crossbar mounting.
5 Silverstars on a Stainless frame, fanned pattern, stainless fasteners to roof crossbar mounting.
0 2014/12/14 08:14:26
For 2014, had lots of Silverstars with still good high beams accumlated.
For 2014, had lots of Silverstars with still good high beams accumlated.
0 2014/12/14 08:13:11
One roof lite out, heck plan a full roof change to 5 silverstars high beams. Nothin but black earth and melted ashphalt in my wake, lolololol
One roof lite out, heck plan a full roof change to 5 silverstars high beams. Nothin but black earth and melted ashphalt in my wake, lolololol
0 2011/07/10 07:30:45
Angled Fogs to right
Angled Fogs to right
0 2011/07/10 07:30:45
Fogs on
Fogs on
0 2011/07/10 07:30:45
Full on
Full on
2 2011/07/10 07:30:45
Passenger instructions.
Passenger instructions.
0 2011/06/06 20:04:13
If it's thumpin under the hood, might as well have it thumpin under the hatch for balance.
If it's thumpin under the hood, might as well have it thumpin under the hatch for balance.
0 2011/06/06 19:58:11
A place for everything, Speed is not the function of the jeep.
A place for everything, Speed is not the function of the jeep.
2 2011/06/06 19:58:11
Brass hinge and stainless scews.
Brass hinge and stainless scews.
0 2011/06/06 19:58:11
Some flexibility for when a little travel space is needed.
Some flexibility for when a little travel space is needed.
0 2011/06/06 19:58:11
Fits good nuf for the girls I go out with.
Fits good nuf for the girls I go out with.
0 2011/06/06 19:58:11
Little degreaser and a power wash freshens up for spring.
Little degreaser and a power wash freshens up for spring.
0 2011/06/06 19:49:14
Fabbin the gas door cover.
Fabbin the gas door cover.
0 2011/06/06 19:49:14
Under construction, stainless eliminates the rust problems. Bunal rubber layer keeps mud from spashing up fouling the cap.
Under construction, stainless eliminates the rust problems. Bunal rubber layer keeps mud from spashing up fouling the cap.
0 2011/06/06 19:49:14
Over 500000 km.
Over 500000 km.
0 2011/06/06 19:49:14
Always read the lable before laundering.
Always read the lable before laundering.
0 2011/06/06 19:49:14
Mini Peep
Mini Peep
0 2011/06/06 19:43:43
Ouch, now we have found the source of vibration.
Ouch, now we have found the source of vibration.
0 2011/06/06 19:43:43
Scotty's HiRise GMC
Scotty's HiRise GMC
0 2011/06/06 19:43:43
Waiting for a fresh door.Little tremclad and brush.
Waiting for a fresh door.Little tremclad and brush.
0 2011/06/06 19:43:43
Short extension on swivel head ratchet and a 12mm box end to control and hold the 13mm socket onto the bolt head. This setup is the cats meow for adjusting the tension bolt of the power stear pump to tension your serpentine belt. So easy to work with.
Short extension on swivel head ratchet and a 12mm box end to control and hold the 13mm socket onto the bolt head. This setup is the cats meow for adjusting the tension bolt of the power stear pump to tension your serpentine belt. So easy to work with.
0 2011/06/06 19:31:45
Harmonic damper on left was failing at the rubber damper seam and moving rearward, rear face of outer ring of damper was coming in contact with timeing chain cover and carried serpentine belt into cover contact also. Talk about a squeel that you cannot pinpoint or adust out. Check your damper condition periodically. Things get real exciting fast if they do seperate. Freshened up another damper off older spare motor on right. It's workin fine.
Harmonic damper on left was failing at the rubber damper seam and moving rearward, rear face of outer ring of damper was coming in contact with timeing chain cover and carried serpentine belt into cover contact also. Talk about a squeel that you cannot pinpoint or adust out. Check your damper condition periodically. Things get real exciting fast if they do seperate. Freshened up another damper off older spare motor on right. It's workin fine.
0 2011/06/06 19:31:45
How about a stainless door for that old rusty gas cap cover. Had the original off, blasted, primed, painted, eventually with all the winter salt, rusting again. So fabbing a 304SS cover.
How about a stainless door for that old rusty gas cap cover. Had the original off, blasted, primed, painted, eventually with all the winter salt, rusting again. So fabbing a 304SS cover.
0 2011/06/06 19:31:45
Don't try this at home without the tools kits of a trained professional. Harmonic damper removal tool is relatively common. The real trick to make the job sweet is the install kit. Puts the damper back on square, easy, no cuss, no fuss.
Don't try this at home without the tools kits of a trained professional. Harmonic damper removal tool is relatively common. The real trick to make the job sweet is the install kit. Puts the damper back on square, easy, no cuss, no fuss.
0 2011/06/06 19:31:45
Need to stop the engine turning over when breaking the center bolt free.
Need to stop the engine turning over when breaking the center bolt free.
0 2011/06/06 19:31:45
The Hello Kitty ZJ with the Peep XJ
The Hello Kitty ZJ with the Peep XJ
0 2011/06/06 19:22:17
Water strainer, $12 at TSC store, some fittings and hose, captures vapour from the crank vent fitting on the rocker cover and keeps my air filter cleaner longer. Unscrew and empty about 1X weekly thru winter, every 2 week in summer.
Water strainer, $12 at TSC store, some fittings and hose, captures vapour from the crank vent fitting on the rocker cover and keeps my air filter cleaner longer. Unscrew and empty about 1X weekly thru winter, every 2 week in summer.
0 2011/06/06 19:22:17
Jeeps, the go anywhere kitten.
Jeeps, the go anywhere kitten.
0 2011/06/06 19:22:17
This 95 ZJ runs so sweet and is total solid underneath.
This 95 ZJ runs so sweet and is total solid underneath.
0 2011/06/06 19:22:17
After with new fogs on bumper bar. Silly as it is I have next plan to rebuild the top lite bar to house 5 of my old silverstar sealed beams, low is pooched but the high beams are still functional. Will be working on it later in the summer.
After with new fogs on bumper bar. Silly as it is I have next plan to rebuild the top lite bar to house 5 of my old silverstar sealed beams, low is pooched but the high beams are still functional. Will be working on it later in the summer.
0 2011/06/06 19:22:17
Some 10ga 304SS to make a mounting bar, some low low cost lights, same as roof, low $ maintenance.
Some 10ga 304SS to make a mounting bar, some low low cost lights, same as roof, low $ maintenance.
0 2011/06/06 19:11:26