Jeep Cherokee Forum
0 2020/07/27 00:06:50
0 2020/07/27 00:06:19
0 2020/07/26 22:54:01
0 2020/07/26 19:46:53
0 2020/07/23 21:00:30
Its in. Raising lowers arms did make it dive. Ill be raising upper with couple options to tune. Seperation at 7 and 8" It is much smoother and softer feeling off road.
Its in. Raising lowers arms did make it dive. Ill be raising upper with couple options to tune. Seperation at 7 and 8" It is much smoother and softer feeling off road.
0 2020/07/23 20:55:32
I did cheap out and will be running bushings on the axle end partly because the 1.25 heim wont clear in my raised bracket. Had to share
I did cheap out and will be running bushings on the axle end partly because the 1.25 heim wont clear in my raised bracket. Had to share
0 2020/07/21 21:30:56
0 2020/07/21 21:30:18
0 2020/07/21 21:29:51
0 2020/07/19 16:23:53
0 2020/07/19 16:22:10
0 2020/07/19 16:17:25
Im currently working on putting my raised short arms raised the xle end im going to run this 3 linked with a johny joint pressed in. Then drift into a longer armed similar to the sfr.
Im currently working on putting my raised short arms raised the xle end im going to run this 3 linked with a johny joint pressed in. Then drift into a longer armed similar to the sfr.
0 2020/07/19 09:31:56
0 2020/07/18 08:12:02
0 2020/07/18 08:11:19
Im stoked
Im stoked
0 2020/07/18 00:44:26
I have some 1.25" heims and bungs to fit 2" tube enroute. Ws planning to get castor locked down with short arms kind get the bugs worked out then go lng arm. It may not happen that wy with so much cstor to kill Just thught id share in this thread since this is actually happening raised arms at axle end. Ohhh im also going to run the upper off the passenger side and raise it to. Helk if i can get castor sorted out with these short arms il run the 3link like i said for awhile.
I have some 1.25" heims and bungs to fit 2" tube enroute. Ws planning to get castor locked down with short arms kind get the bugs worked out then go lng arm. It may not happen that wy with so much cstor to kill Just thught id share in this thread since this is actually happening raised arms at axle end. Ohhh im also going to run the upper off the passenger side and raise it to. Helk if i can get castor sorted out with these short arms il run the 3link like i said for awhile.
0 2020/07/17 18:56:14
0 2020/07/17 18:49:21
0 2020/07/17 18:47:13
Shes lipless
Shes lipless
0 2020/07/15 23:13:49
0 2020/07/15 23:12:23
0 2020/07/15 23:11:47
0 2020/07/01 21:21:40
Taking it slow and easy
Taking it slow and easy
0 2020/06/28 11:18:53
0 2020/06/28 11:18:00
0 2020/06/28 11:17:10
0 2020/06/28 09:23:51
I guesd i didn't put a photo of the finished 30 up yet.
I guesd i didn't put a photo of the finished 30 up yet.
0 2020/06/26 17:26:35
My 3" turn down at axle
My 3" turn down at axle
0 2020/06/25 07:18:01
Then sunset into a thunder storm.
Then sunset into a thunder storm.
0 2020/06/24 21:35:03
Even cleaned under the hood. Need to make something to support coolant hoses some day
Even cleaned under the hood. Need to make something to support coolant hoses some day
0 2020/06/24 21:33:32
0 2020/06/24 21:32:28
0 2020/06/24 21:31:42
0 2020/06/19 17:26:58
0 2020/06/19 17:20:39
This is pretty close to it should be. This is my jeep my track bar maches drag link for angle and almost length. Only difference is your drag link munts under the knucke and you have stock track munt on the axle side. Jack the jeep up tires 4" off the ground stick a long digger bar under tire and pry up. Your looking for slop in balljoints and control arm bushing that may cause wobble. Dont discount parts that are new or thught to be new.
This is pretty close to it should be. This is my jeep my track bar maches drag link for angle and almost length. Only difference is your drag link munts under the knucke and you have stock track munt on the axle side. Jack the jeep up tires 4" off the ground stick a long digger bar under tire and pry up. Your looking for slop in balljoints and control arm bushing that may cause wobble. Dont discount parts that are new or thught to be new.
0 2020/06/19 16:47:51
0 2020/06/19 16:31:28
0 2020/06/18 18:03:05
0 2020/06/15 20:08:36
0 2020/06/15 20:05:39