Post your lifted ZJ/WJ
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
#124
Newbie
Join Date: Oct 2012
Location: Northern Illinois
Posts: 9
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Grand Cherokee
Engine: 5.2L V8
ZJ
Here's my grand... (I'm new on the forum btw, so hey everybody!) She's a 97 5.2 limited with 5.5" IRO short arms (fixed bottom, adjustable uppers), 35x12.5" mud grapplers, bushwacker fender flares, K&N FIPK, custom magnaflow 3" exhaust, front and back rockford component speakers and a few other small parts. Drivetrain is mostly stock, 3.73 gears (I think :/), dana 44a rear, dana 30 front, no lockers, 249 transfer case (I have a 231, but I need to swap it in) I'm looking into rebuilding junkyard axles soon. Either dual 60s or a 60 rear, hp 44 front combo... Right now there is only a very minor rub when steering max side to side (when pwr steering pressure relief valve triggers)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
#125
Originally Posted by mud_thrower87
Here's my grand... (I'm new on the forum btw, so hey everybody!) She's a 97 5.2 limited with 5.5" IRO short arms (fixed bottom, adjustable uppers), 35x12.5" mud grapplers, bushwacker fender flares, K&N FIPK, custom magnaflow 3" exhaust, front and back rockford component speakers and a few other small parts. Drivetrain is mostly stock, 3.73 gears (I think :/), dana 44a rear, dana 30 front, no lockers, 249 transfer case (I have a 231, but I need to swap it in) I'm looking into rebuilding junkyard axles soon. Either dual 60s or a 60 rear, hp 44 front combo... Right now there is only a very minor rub when steering max side to side (when pwr steering pressure relief valve triggers)
#126
Not a great pic but its all I have on my iPhone. It's a 95 zj with 190k miles np231 tc. Runs great though!! 32" tires, 3.5" RE coils, pro comp xl shocks, quick discos, all new front end, moog. Next is axle swap and lockers, winch and armor. She is getting a face lift this winter to repair all this summers damage.Looking forward to learning some from you all. Later.
Last edited by mudnrox; 10-21-2012 at 12:23 AM.
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
#127
#128
Newbie
Join Date: Oct 2012
Location: Northern Illinois
Posts: 9
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Grand Cherokee
Engine: 5.2L V8
Not really no, turning the wheel on street is almost exactly the same as stock surprisingly. It says that I'm getting 12mpg which is only a couple less than before, but then again nothing is calibrated right and my speedometer displays the speed 6-7mph lower than actual. (But wouldn't that mean that I'm actually moving greater distances than the computer thinks, therefore getting a better mpg than it's telling me? idk...?) What I do know, however, is that when I let off the gas those heavy tires just keep on rollin . They're probably twice as heavy as the stock setup so theres a lot more momentum, but then again a lot more drag too :P. The tires are amazing though, one of the best - second to super swampers in the mud and hard stuff, but fairly smooth on the road. (And not that loud either) The main problem with this kind of thing is the handling on road... My jeep tends to pull a bit after big bumps and the maxed out short arms don't give the best ride quality on a bumpy highway, but once I rebuild some axles and get longarms... haha oh yeah axles... I really want some 4.56 gears, I used to be able to hit 0-60 in 6.7sec (beat out my friend's crown victoria police interceptor XD ) before my lift and now she's a complete dog, which is to be expected...
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
#130
Senior Member
Join Date: May 2012
Location: Ahwatukee, Phoenix, AZ
Posts: 960
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L
95 limited, 5.2, upcountry coils with 1.75 spacer in front and 3/4 spacer in the back. sittin on bald 235/75R15 tires, will be getting 30x9.5R15 allterrains soon. 46rh, 242 swap soon, front tow hooks from the junkyard, harbor freight halogen fog lights, the list goes on
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following 2 users liked this post by biggoofy:
Carlos Manuel Davis (06-03-2020),
MojoMello1 (08-29-2020)
#132
Originally Posted by biggoofy
96 Zj Hp44 9", 4.88s, lockers, ironman4x4fab long arms, stretched to 114", internal cage, bumpers, 10,000 lb winch, 35s.
#133
Member
Join Date: Apr 2012
Location: East Haven, Ct
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0
96 Zj Hp44 9", 4.88s, lockers, ironman4x4fab long arms, stretched to 114", internal cage, bumpers, 10,000 lb winch, 35s. Attachment 151125Attachment 151127
The following users liked this post:
Carlos Manuel Davis (06-03-2020)