Justjoshnya

So i have a mj im wanting to do a spring over axle swap but im also wanting to put in a 8.25.
i know i have to weld up new perches but how does this all play into the spring over axle swap? Any help is gratley appreciated.

Justjoshnya

Took me 2 years to get my xj back on the road. Hoping the mj is a little quicker return.

Justjoshnya

This is the mj befor any wrenching

WyoCherokee

pretty simple. cut the old perches off the 8.25, set them on the axle, clamp the springs down loosly on to the perches in the vehicle. set your pinion angle. tack the perches to the tube. drop axle, weld perches on, re-install. bolt driveline and brakes on....drive away.

89eliminator

you will need to address the shock mounts as well.

Justjoshnya

Thanks guys. I got the new perches welded on and welded shock mounts on as well. Should be good to go on that. Now the next off days the bed will be getting cut down to size.

That Jeep Guy XJMJ

broken leaf spring(s)? why does the tire look like its pushed into the front of the wheelwell?