88whitecomanche comanche build thread
#113
CF Veteran
Thread Starter
Join Date: Oct 2013
Location: Miami, fl
Posts: 7,378
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Never crossed my mind because I don't want to be that tall....honestly no point to the wheeling we do here...well you know how deep these Florida mud holes can be...so I don't test anything unless I see someone else go first....lol
#115
CF Veteran
Thread Starter
Join Date: Oct 2013
Location: Miami, fl
Posts: 7,378
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
So I've been working hard to get my ax15 mostly done but got into Snag with the master and slave cylinder....
Ax15 and np231 ready to go in....
I didn't have a transmission jack...so I had to get creative to get the transmission up with just the floor jack....
I used a ratchet strap and a 2x4 on top of the transmission tunnel...few inches at a time and I finally got it in...
Ran into a problem trying to get the crossmember in place...
But a little bit of research on naxja a guy made a bracket that ties the crossmember into stock ax5 location and ties the transmission mount together....and also had to clearance the tunnel a bit for the wrangler clocking
Ax15 and np231 ready to go in....
I didn't have a transmission jack...so I had to get creative to get the transmission up with just the floor jack....
I used a ratchet strap and a 2x4 on top of the transmission tunnel...few inches at a time and I finally got it in...
Ran into a problem trying to get the crossmember in place...
But a little bit of research on naxja a guy made a bracket that ties the crossmember into stock ax5 location and ties the transmission mount together....and also had to clearance the tunnel a bit for the wrangler clocking