1991 Comanche crank but won't start.
Thread Starter
Senior Member
Joined: Nov 2014
Posts: 892
Likes: 4
From: Lennox/Sioux Falls South Dakota
Year: 1996
Model: Cherokee (XJ)
Engine: 4.0 liter inline 6
Hey guys I just purchased a 91 comanche (won't be picking it up for 2 weeks yet) but I did go look at it today and I was informed that the motor will crank but will not start. It has a new distributor and a new fuel filter and I mean brand new. I just want some heads up on some leads I should follow to track down the issue. My first guess would be CPS but before I go chase anything I would like some other advice. Thanks!
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Hey guys I just purchased a 91 comanche (won't be picking it up for 2 weeks yet) but I did go look at it today and I was informed that the motor will crank but will not start. It has a new distributor and a new fuel filter and I mean brand new. I just want some heads up on some leads I should follow to track down the issue. My first guess would be CPS but before I go chase anything I would like some other advice. Thanks!
Thread Starter
Senior Member
Joined: Nov 2014
Posts: 892
Likes: 4
From: Lennox/Sioux Falls South Dakota
Year: 1996
Model: Cherokee (XJ)
Engine: 4.0 liter inline 6
Has spark and good fuel pressure. I am going to see if the distributor needs adjusted I asked the kid if he checked TDC when he installed it and he said he didn't know what it was so I'm pretty sure that's the issue.
Thread Starter
Senior Member
Joined: Nov 2014
Posts: 892
Likes: 4
From: Lennox/Sioux Falls South Dakota
Year: 1996
Model: Cherokee (XJ)
Engine: 4.0 liter inline 6
Got it running and it has some blow by. It should be good until I get the xj back with the stroker in it then I can start a motor overhaul on the MJ


