Part 68321424AB
Status of Part 68321424AB Wiring kit - Recreational Flat Tow for a 2015 Jeep Cherokee
|
Factory wiring..........
Hey Schwartz, Capes here.
I just installed a factory hitch on my 2017, but I used a "Curt" wiring harness. You only have to remove the taillights to install. Curt says to mount their box inside the vehicle, but I mounted it outside. I put silicone all around the edge to keep water out. I did the same thing on my Isuzu, and it worked. You have to run a power wire under the vehicle to the battery. If you install the factory harness, which cost as much as the factory hitch, they have you taking the whole Jeep apart to install it. They have you running the power wire to the fuse box under the dash through the inside under the carpet and door sills. What a mess............................... P.S. "T-One" makes a box similar to the "Curt" that is made to be installed outside. |
Just bought used 2015 Jeep Cherokee Trailhawk, how can I tell in the flat tow wiring harness modification is installed? |
What Wiring harness did you use? Thanks
Ron |
Imwiring harness 68321424AB
I installed the wiring harness 68321424AB
I got from dealer ( you must tell them it’s a service bulletin number) i installed it myself and saved the $300. Instructions are good with lots of pictures.
Originally Posted by DrRon
(Post 3550825)
What Wiring harness did you use? Thanks
Ron |
All times are GMT -5. The time now is 05:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands