Hi from Martinez GA
#1
Newbie
Thread Starter
Join Date: Sep 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
Hi from Martinez GA
Just picked up a 1990 Jeep Cherokee Laredo 4X4 last week and am anxious to make a few changes. I've been trolling the forum for the past week and decided I might as well take the plunge and register.
Pics from the day I brought her home.
Swapped on some 30X9.50 15 tires I had handy and am ready to add a 3in Rough Country lift. Also have a prothane full poly kit and some poly motor mounts to install along with a new trans mount. Because of health issues it may be slow going but I'm pretty sure I can handle the install.
Have a few issues to sort out, trans is slipping intermitantly but that seems to be TPS or TCM (electronics issue), basic service stuff.
So far all I've done is drain the diffs, replace gasket, and refill with 80w 90. Replaced trans filter and refilled with dexron/mercon, drained and refilled transfer case with mercon, and flushed and refilled the coolant system after changing the t-stat. Quite the busy week for me, currently recovering and preparing for the rear leaf spring bushings, shocks, and aal.
Anyone close by that wants to lend a hand let me know!
Pics from the day I brought her home.
Swapped on some 30X9.50 15 tires I had handy and am ready to add a 3in Rough Country lift. Also have a prothane full poly kit and some poly motor mounts to install along with a new trans mount. Because of health issues it may be slow going but I'm pretty sure I can handle the install.
Have a few issues to sort out, trans is slipping intermitantly but that seems to be TPS or TCM (electronics issue), basic service stuff.
So far all I've done is drain the diffs, replace gasket, and refill with 80w 90. Replaced trans filter and refilled with dexron/mercon, drained and refilled transfer case with mercon, and flushed and refilled the coolant system after changing the t-stat. Quite the busy week for me, currently recovering and preparing for the rear leaf spring bushings, shocks, and aal.
Anyone close by that wants to lend a hand let me know!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)