Go Back  Jeep Cherokee Forum > Buy, Sell, Trade > Part Outs
99 XJ Lift Parts/Axles/Tires >

FS[MidAtl]: 99 XJ Lift Parts/Axles/Tires

Part Outs Post any vehicle part out threads including detailed pictures and information.
Mark this thread as Unsold

FS[MidAtl]: 99 XJ Lift Parts/Axles/Tires

Old 06-03-2018, 04:03 PM
  #1  
Junior Member
Thread Starter
 
Join Date: May 2015
Location: Blacksburg, VA
Posts: 30
Year: 1999
Model: Cherokee
Engine: 4.0
Default 99 XJ Lift Parts/Axles/Tires

Rebuilding my 99 XJ so I am selling the following. All located in Blacksburg VA.


5 x 35x12.50R15 Tires - General AT tires. One has small bubble in sidewall that was there from mounting it wrong by the shop. I has not gotten any bigger in 2 years and I ran it just fine before moving to the spare. Only about 1000 road miles on them in 3 years as it's a garage kept trail vehicle. Tread is great and probably 85% left at least. Balances fine.



Black ProComp wheels with 4.5 backspacing look great, but some have some minor rock rash but nothing major at all. 5x4.5 backspacing.



$850 for tires mounted on wheels.


Built Dana 30 HP and 8.25 Axles -
Putting new axles under my Jeep so selling current set. Just got back from Black Mountain and like always, they did awesome. This is currently under a Jeep XJ but will fit other Jeeps and can be made to fit other vehicles as well.



-> HP Dana 30 with over the knuckle 1-ton steering from JCR.

Yukon 4.56 gears with Aussie locker.

Chromoly shafts and stock shafts come with it as spares.

New inner seals recently and outer seals as well.

Alloy USA ball joints.

Lower control arm mount guards welded on.

Small truss on it as well as G2 cover.

New calipers and brakes installed within the last year as well on front and new wheel bearings on both sides with replacements still here as spares (can never have too many spares parts for an offroad rig)



Here is a parts list for JUST the front axle:

-New Brakes and Calipers ~ $100

-Alloy USA Ball Joints $199

-Aussie Locker $259

-Chromoly Shafts $490

-Outer Tube Seals $50

-Ring and Pinion $130

-G2 Cover $119

-Control Arm Mount Skid plates $50

-1 Ton OTK steering $390

(misses other items like seals and truss) This alone comes to $1,417 WITHOUT any labor to install or the axle housing itself!



-> Rear 8.25 with 4.56 gears and Powertrax locker.

Chromoly shafts and stock shafts come as spares.

Also have Ruffstuff cover and truss (not installed) that goes with it.

New drum brakes installed this year with wheel cylinders and everything


$1800 for the set. Ready to go!


Rubicon Express Control Arm Drop Brackets and Supports - drop brackets installed and used but the supports that go back and bolt to the "frame" have never been used


Drop brackets are $177 new and supports are $78. I'll take $150 for the pair


JeepXJExpo is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alsxj
Wanted
0
03-30-2014 08:52 PM
Lucky Jeff
Classifieds
19
08-19-2012 11:57 AM
FOXxX
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
07-13-2010 04:01 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: FS[MidAtl]: 99 XJ Lift Parts/Axles/Tires


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.