Mark this thread as Unsold
FS[SouthEast]: 97-01 XJ Parts (20 Different XJs for parts)
Newbie
Joined: Nov 2018
Posts: 5
Likes: 1
From: Littleton CO
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Hi!
'99 XJ, need the floor bracket that the center console/armrest anchors to, under the armrest/bucket. If you were to open the center console/armrest, remove the lid, then remove the 2 last screws and pull the whole bucket out...I need the plastic assembly those last two screws screw into. It's a black plastic cover over something that sits on the drive shaft hump, has two turrets that stick up with speed nuts on top. The 2 screws through the bottom of the bucket grab those speed nuts . The turrets on mine broke, so the whole console sways side to side.
'99 XJ, need the floor bracket that the center console/armrest anchors to, under the armrest/bucket. If you were to open the center console/armrest, remove the lid, then remove the 2 last screws and pull the whole bucket out...I need the plastic assembly those last two screws screw into. It's a black plastic cover over something that sits on the drive shaft hump, has two turrets that stick up with speed nuts on top. The 2 screws through the bottom of the bucket grab those speed nuts . The turrets on mine broke, so the whole console sways side to side.
Thread Starter
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Hi!
'99 XJ, need the floor bracket that the center console/armrest anchors to, under the armrest/bucket. If you were to open the center console/armrest, remove the lid, then remove the 2 last screws and pull the whole bucket out...I need the plastic assembly those last two screws screw into. It's a black plastic cover over something that sits on the drive shaft hump, has two turrets that stick up with speed nuts on top. The 2 screws through the bottom of the bucket grab those speed nuts . The turrets on mine broke, so the whole console sways side to side.
'99 XJ, need the floor bracket that the center console/armrest anchors to, under the armrest/bucket. If you were to open the center console/armrest, remove the lid, then remove the 2 last screws and pull the whole bucket out...I need the plastic assembly those last two screws screw into. It's a black plastic cover over something that sits on the drive shaft hump, has two turrets that stick up with speed nuts on top. The 2 screws through the bottom of the bucket grab those speed nuts . The turrets on mine broke, so the whole console sways side to side.
Newbie
Joined: Jan 2019
Posts: 0
Likes: 0
Model: Cherokee (XJ)
96 4.0. Trying to convert AX15 to AW4
As the title says, Im trying to convert my XJ from the AX15 manual trans to the AW4 auto trans. And everything I would need to do the job. Hoping you have what I need.
